B18C GSR vs B16A

[aranny2001]

guys, compare btw B18C GSR and B16A, which one maintenance wise is cheaper? more reliable ? by the way what is the common problem for this 2 halfcut engine? my engine just dead yesterday night after 17 years .... now have to spend money to transplant... my driving style is not aggressive... which one suit for me ? :wavey::wavey:

 

[ddv_nk12]

Bro, mind to share what went wrong with your engine? IMO, B16A would suit you. If you want slightly more power, then go for B18C.

 

[deathzone]

Depends on ur budget, if money not a problem then better choose b18c, bigger cc more torque. But if u have lower budget then go for b16a, in future still can change block to b18c/b20b.

 

[mysayasan]

b18c GSR FTW

 

[arrowhead]

bro, u asked so many times about this already still haven't decide? its obvious the bigger cc wins. no comparison. i assure u.

if u do otherwise, u will 1029387289631% regret. this is statistically proven by all the previous b16a owners.

dont need to ask already. b18c straight. i can guarantee u, if u go for b16a, within 1-2 years, u will source for a 1.8.....

been there done that

 

[siauann]

what happen to ur current engine? what is ur current engine? clock how many km and died?

 

[aranny2001]

bro, u asked so many times about this already still haven't decide? its obvious the bigger cc wins. no comparison. i assure u.

if u do otherwise, u will 1029387289631% regret. this is statistically proven by all the previous b16a owners.

dont need to ask already. b18c straight. i can guarantee u, if u go for b16a, within 1-2 years, u will source for a 1.8.....

been there done that

yea lo..... very hard to make decision cause dunno which one is good.. and alot of things need to consider lo.... like fuel consumption which play and important rule for my wallet... lol....

---------- Post added at 09:39 PM ---------- 6 hour anti-bump limit - Previous post was at 09:35 PM ----------

what happen to ur current engine? what is ur current engine? clock how many km and died?

alot of problem, in the end suddenly temp rise , pull over try to start back again but failed due to low battery... then ask the tow service tow the car back to my house, next day after battery changed, my car started but thick white smoke came out from the exhaust and idling sound like the boxer engine ==.... i think gasket gone... since ive top overhaul it last few months, i think this engine if not fit anymore for daily use... this car about 17 years already... how many km don remember already

 

[YEN96]

there is no replacement for displacement in Honda Vtec context.

Want to pull tarik RPM ...use lower cc ..B16a ,b16B or B18.

Once u go up higher cc, ur max. rpm drop.

 

[aranny2001]

there is no replacement for displacement in Honda Vtec context.

Want to pull tarik RPM ...use lower cc ..B16a ,b16B or B18.

Once u go up higher cc, ur max. rpm drop.

im not a guy who like to rev so high... lol.... just wanna get a vtec engine for like overtaking use perhaps...

 

[deathzone]

im not a guy who like to rev so high... lol.... just wanna get a vtec engine for like overtaking use perhaps...

Like that u should go for b20b vtec, no need tarik high rpm already got enough torque.

 

[aranny2001]

Like that u should go for b20b vtec, no need tarik high rpm already got enough torque.

then it will be too dangerous for my car... dunno the chasis can tahan or not

 

[mADmAN]

even EF can tahan B20 and F20 and H22 without the need to mod the chassis...why u wanna say ur chassis cannot tahan?

and for ur driving...the whole overtaking thing... b16 definitely NOT for u...coz ur looking for torque. and VVT engines like VTEC, MIVEC etc have a tendency of lacking torque.

go for D16 and turbocharge it. ull get ur torque then....n dont have to worry much about fuel consumption if its properly tuned. road tax still cheap somemore.

but if u still want VTEC NA...either B18C GSR or B20..but fuel will consume more than B16...not by much..but still more...again, also depending on ur tune.

imho. DOHC VTECs dont suit u. theyre for people who like to rev high and slightly aggressive driving. if u just want extra power for normal overtaking and driving... D16 turbo is the wat suits u.

 

[aranny2001]

even EF can tahan B20 and F20 and H22 without the need to mod the chassis...why u wanna say ur chassis cannot tahan?

and for ur driving...the whole overtaking thing... b16 definitely NOT for u...coz ur looking for torque. and VVT engines like VTEC, MIVEC etc have a tendency of lacking torque.

go for D16 and turbocharge it. ull get ur torque then....n dont have to worry much about fuel consumption if its properly tuned. road tax still cheap somemore.

but if u still want VTEC NA...either B18C GSR or B20..but fuel will consume more than B16...not by much..but still more...again, also depending on ur tune.

imho. DOHC VTECs dont suit u. theyre for people who like to rev high and slightly aggressive driving. if u just want extra power for normal overtaking and driving... D16 turbo is the wat suits u.

haha, i dun really want hassle problem like bolt on.. may be still stick to na b series... i thought if gsr fit into my eg9 will be save fuel due to light chasis?

 

[khencana]

funny la that guy..... go for b18c, clear....

 

[mADmAN]

then go find B18B halfcut and install..should be cheaper coz no demand.


1.8 non vtec....slightly more torque than GSR but peak torque is 1k rpm earlier. more suitable for ur driving

or get B20B halfcut..no need to VTEC it...just run it stock. even more torque

but if u INSIST on wanting VTEC... B18C GSR....the end.

 

[aranny2001]

then go find B18B halfcut and install..should be cheaper coz no demand.


1.8 non vtec....slightly more torque than GSR but peak torque is 1k rpm earlier. more suitable for ur driving

or get B20B halfcut..no need to VTEC it...just run it stock. even more torque

but if u INSIST on wanting VTEC... B18C GSR....the end.

thx for the suggestion bro.. but why honda will make the B18B as non vtec engine since the torque will be slightly higher than GSR?? if like that why honda created vtec? anyway the B18B halfcut is from what car actually? hope you guys can clear my doubts~ thx~ noobie here...

 

[deathzone]

Wah bro if u still dont understand about honda/vtec engine u need to google alot . Ur thread question is b16a vs b18c gsr....and i think a lot of ppl already give u suggestion and answer.

 

[arrowhead]

just buy my car and it'll solve all your problems. =)

 

[aranny2001]

just buy my car and it'll solve all your problems. =)

hahahahaha~ why you wanna let go your car?

 

[arrowhead]

i bought a house!