Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="epj7900" data-source="post: 607180" data-attributes="member: 13524">JinKL,Thanks for the opinion. I shall use the Nitto until it kaputs. I can get the thermal wrap pretty cheap because where I work there are Heat Treatment Machines and they use these wraps for their pipes. I can get the cloth type 20meters for RM 60 and the fiber type for RM 120 - may be a little lesser for 20 meters. It's exactly the same as the SARD one - which is like RM 100 for just a little. I also can get the 1 inch type. I'll get that and wrap the manifold - I've seen a GTI in Terato with the wrap done - looks very decent. Yes agree with you - the SS Racing one is a little expensive. As I know the stainless steel manifold with wastegate outlet is about RM 900 - I got the quote from Pitworks at JB (Kevin). It's from Thailand I know. Jin - Anywhere I can get gauges at a good deal. I want the memory type - Most important is Ext Temp - because I already have a Blitz Illumini Boost Gauge. The new Blitz Stepping Motor - Black Colour can get for RM 2100 for 3 pcs with control unit. I collect my crank shaft n conrods soon - then will build back my engine. Seems like I am unable to get the bearing - King Bearing is like freaking RM 750 - no way I am going for that. I am not able to get hold of the Clevite in Malaysia. I am going to confirm back on the shipping charges from States. I have a friend there - may be ask him to purchase it and then pass mail it to me. Bearing should not be very heavy or big right ? besides Koyo, NTN n all... what other good bearings are there?Thanks bro.... will update you guys from time to time. Keep me in the loop - if you guys have any gatherings - I have 7 cars with me - Group - We established ourselves as Ruff Ryders - and we do our cars at our own WS at Kulai, JB - Ruff Gears Enterprise. We are located very close to Bibir Design and AL Motorsports. We have 3 - Evo 3, 1 - Evo 2, 1 - GSR, 1 - H22 Accord, 1 - Eterna and 1 - EG - B16A. Our friends from KL are also pretty much in to the car scene - Antera Motorsports. They have gone in to Autosaloon but we guys prefer performance. They do their airbrush work at Nitro Design.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Manual conversion JB

Any bro can intro reasonable workshop for r34 manual conversion in JB area? Thanks in advance.

Lancer CM5A Fibre Glass Fender for Sale

Selling on behalf of a friend

1 set Lancer CM5A fibreglass fender taken out from half cut in Japan, no crack or damaged to the fender, selling RM 350, location Kepong Industrial Park, please do not SMS, contact...

mira L2 turbo

im having problem wit my turbo... im thinking of changing it to the original stock turbo... how much izzit? wher can i get one? wat if i wanna change the turbo to another kind of turbo? which one is recommended?? thanxx