Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="deacon" data-source="post: 2128516" data-attributes="member: 12923">Compression is already high in a 4G93P engine. It normally runs around 10:5:1 compression ratio.When you add Mivec pistons to the engine your compression goes up to 12:1:1 or something really close to that. In M'sia there is no high enough octane gas to power such compression. Even if you use normal 1.6 pistons its still tricky and dangerous.The reason being that the aforementioned pistons stick out of the block whereas the normal 4G93P pistons do not. When your high compression pistons push up there is more compression build up. In a long stroke engine that's very bad.Think of it this way (Hopefully this will make some sense) a B16A has the same bore and stroke size as the 4G92 Mivec engine. Our 4G93P engines has the same bore size but a longer stroke than the Mivec and B16A. Which means to get the extra 200cc of displacement a lot of stroke has been added. The longer the stroke the harder the engine needs to pump upwards to create the desired power. This creates more problems because the higher the revs the more stress the engine experiences.For example comparing a B18C1 or B18C5 to a 4G93 Mivec hybrid. The B18C has a 84mm size piston which mean it has more bore while maintaining a shorter stroke therefore making it easier to rev.I don't know whether this makes any sense, haha. But that's as much as i can explain.A good piece of advice to some is maybe bore the block out and use 82mm pistons but you really need a mechanic that knows what he's doing or you're basically screwed.</blockquote>

Verification

The Marketplace Latest

original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Open track day 26th Feb

Anyone joining the SIC open track day in the morning before the Megalap event?

Dad sow the seed of speed in son for first time w/video

https://www.zerotohundred.com/wp-content/uploads/2011/07/father1-600x391.jpg

The bond between father and son is something that often escapes the boundaries of words, shaping memories that last a lifetime and not to...

AFC Neo on my Celica VVTL-i

Dear Sifu's,

Need help. My car originaly equipped with this AFC Neo but unfortunately somebody had played with it and mistakenly car cannot start . Then try to find the function and I reset it (initialized). Then I...