Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="spyderslr" data-source="post: 2271476" data-attributes="member: 2195">i used to think that Mivec can be as good as Vtec as well until the day i drove a B-series Vtec myself....performance aside, the driving experience of both are quite as different as chalk n cheese.......hahaha.....anyway, Mivecs has its advantages n so does Vtecs....but on an overall package comparison, Vtec definitely has the edge.....2nd Gen Mivecs managed to close the deficit wif better gearbox design, but somehow the Vtec magic is still there.......wat to do, Mitsu wanna concentrate on its Turbo 4Gs......Mivecs are like the anak tiri oni....sighhh.....xin: No, not all Mivecs comes wif an OEM LSD.....if they do, we wun be having trouble wif the "special" driveshaft for the OEM LSDs.....they are optional items....kwai: yours a monster, different story leh....hehehehe....Wajafly: you'll b surprised that alot of Mivec 1.8s runs on 4G93 SOHC or DOHC pistons......hehe.....its a safer recipe for reliability....however, i still belief Mivec pistons are the way to go... =)....afterall, mine has been running close to 2 years (20k++ km) + 4 trackdays wifout any problems.....havent even overhauled it......RS for 1st gen Mivec are no different than the non-RS...but for 2nd gen CK/CJ, there are some differences under the cam cover.... =).....Once upon a time, a New Zealander gave me this info....not sure if its true, just to share and hope its useful....... =):2nd Gen Mivec CJ4A RS ALTERATIONS:1/ Titanium valves. 20% lighter & 30% less inlet resistance.2/ Different camshafts. Maximum output from 7500rpm to 7750rpm.3/ 40kg weight reduction.4/ Heavy duty gearbox output shaft.5/ Heavy duty clutch linings.6/ Fifth gear ratio changed from 0.767 to 0.820.7/ Helical type LSD (optional)8/ Lightened flywheel.9/ Strengthened lower suspension arms with heavy-duty bushes.10/ Reinforcing plates on trailing arms to increase camber rigidity.11/ High ratio steering rack. 2.6 turns lock to lock, normally 2.9.12/ Increased steering pump flow.13/ 15” front ventilated disc brakes with two pot callipers. (optional)14/ Larger diameter proportioning valve in brake master cylinder.15/ Modified fuel tank reservoir outlet to reduce surge at high G.16/ Double accelerator return springs.17/ Water-cooled oil cooler. (optional)18/ High flow catalytic converter & low pressure muffler. 14% less back pressure. GEAR RATIOS - MIRAGE MIVECMODEL CA4A CJ4A CJ4A RSGear1 3.083 3.071 (lower) 3.0712 1.947 1.947 (same) 1.9473 1.285 1.379 (higher) 1.3794 0.939 1.030 (higher) 1.0305 0.756 0.767 (higher) 0.820R 3.083 3.363 (higher) 3.363Final Drive Ratio 4.592 4.625 (higher)5th gear @ 237.32kmh ÷ 7500rpm = 0.0316426 x 6000rpm = 189.86kmh (4.625)5th gear @ 215.86kmh ÷ 7500rpm = 0.0287813 x 6000rpm = 172.69kmh (5.000)170kmh in 5th gear @ 6000rpm = 5.000 final drive ratio (ATS)</blockquote>

Verification

The Marketplace Latest

original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Challenge! Prices of R32 GTR

Hello guys,

Okay, here's a challenge for all you guys....

1. If you have EVER seen a R32 GTR (must be authentic) for sale in Malaysia, please put down the asking price.

(when)___(price)

2. If you have...

where can i buy fd3s spark plugs??

wat kind of spark plugs does fd3s use? wat's the price like? thx for the help...

how to mod lancer plate holder (back)

hello to all DIY master...
can anybody guide me...
im trying to install lancer plate holder (back) to my wira sedan..
but dunno where 2 start n how to do it in d proper way..

please help me..
TQ

virgin modde