6a12tt-rs.perdana v6

[budakkampungaje]

Pomen already cek all hose there was no leak.....@that meter broke...?

Siri bercakap dengan HP sendiri...

 

[DanzEterna]

are u using metal gasket? if no your head will pecah soon. i guess the boost reading is incorrect.
should be max 0.8-1bar

 

[budakkampungaje]

are u using metal gasket? if no your head will pecah soon. i guess the boost reading is incorrect.
should be max 0.8-1bar

Nop dont use metal gasket...O.M.G.....so how to settle this? :(

Siri bercakap dengan HP sendiri...

 

[DanzEterna]

maybe meter faulty, try swapping with your friends one 1st.

---------- Post added at 01:28 PM ---------- 6 hour anti-bump limit - Previous post was at 01:28 PM ----------

or maybe the vacuum hose salah cucuk lubang, try to get 2nd opinion from another mech.

 

[budakkampungaje]

maybe meter faulty, try swapping with your friends one 1st.

---------- Post added at 01:28 PM ---------- 6 hour anti-bump limit - Previous post was at 01:28 PM ----------

or maybe the vacuum hose salah cucuk lubang, try to get 2nd opinion from another mech.

1st istall it was at 0 bar....the blue hose 1 is boost meter hose....

Siri bercakap dengan HP sendiri...

 

[vr2turbo]

Heheheheh.....budged already lariii laaa....
What is difrent 0 bar and -0.5 bar reading at boost meter?wich 1 is true 0 bar or -0.5 bar?

Right or not this boost meter reading?

Siri bercakap dengan HP sendiri...

At idle should be -0.5 to -0.6. At 0 means normal use like NA.
For your boost what have you set it up to? Like mine is still standard at 0.6, so maximum throttle will stay at 0.6.
Maybe meter is not wrong but your boost is high, so be careful, better check...

 

[Jac83]

Heheheheh.....budged already lariii laaa....
What is difrent 0 bar and -0.5 bar reading at boost meter?wich 1 is true 0 bar or -0.5 bar?

Right or not this boost meter reading?

Siri bercakap dengan HP sendiri...

Bro, I salute you as you dare to go beyond the limits even without metal gasket but if I were you I'll get a metal gasket installed before going for high boost though(if your boost meter is accurate) as I wouldn't want to risk a blown gasket or worst case scenario blown engine in the middle of the road lol.

 

[budakkampungaje]

Bro, I salute you as you dare to go beyond the limits even without metal gasket but if I were you I'll get a metal gasket installed before going for high boost though(if your boost meter is accurate) as I wouldn't want to risk a blown gasket or worst case scenario blown engine in the middle of the road lol.

I dont know my car was like that.....I dont do any things just install boost meter, 2.5 inch pipe intercooler, blitz sus power air flow, 3 inch from front to rear exzos pipe no middle muffler & nissan silvia s15 exzos 3inch thats all......I think my car was read at 0.5 bar - 0.8 bar only..... :(

Siri bercakap dengan HP sendiri...

 

[Jac83]

I dont know my car was like that.....I dont do any things just install boost meter, 2.5 inch pipe intercooler, blitz sus power air flow, 3 inch from front to rear exzos pipe no middle muffler & nissan silvia s15 exzos 3inch thats all......I think my car was read at 0.5 bar - 0.8 bar only..... :(

Siri bercakap dengan HP sendiri...

Then better double back to your mech if u have any and get it checked out otherwise send to dyno to be safe. Or u can install an external waste gate where u can set the boost level to either low or high. Running high boost on the road without metal gasket is like waiting for the time bomb to go off.

 

[budakkampungaje]

My car make a sound like a wastegate...Its sound like whoooooossshhhh when I step on gas paddle.......then when boost meter at 0.6 he make sound like 'berdengung'.....why aaa..... :(

Siri bercakap dengan HP sendiri...

 

[DanzEterna]

like exhaust bocor is it?

 

[budakkampungaje]

like exhaust bocor is it?

Yup.....

Siri bercakap dengan HP sendiri...

 

[vr2turbo]

like exhaust bocor is it?

Waste gate leaking out?

 

[DanzEterna]

looks like there is a leak somewhere....i experienced the same thing as u but just cant remember how i rectified the problem.
if not mistaken something bocor at the exhaust system

 

[budakkampungaje]

looks like there is a leak somewhere....i experienced the same thing as u but just cant remember how i rectified the problem.
if not mistaken something bocor at the exhaust system

So check exzos system from front to rear?

Siri bercakap dengan HP sendiri...

 

[budakkampungaje]

How to setting this bov blitz??

Siri bercakap dengan HP sendiri...

 

[DanzEterna]

So check exzos system from front to rear?

Siri bercakap dengan HP sendiri...

yup.....jack up your car, go underneath, start your engine & get someone to rev your engine while u hear where the sound is coming from.

---------- Post added at 09:05 PM ---------- 6 hour anti-bump limit - Previous post was at 09:04 PM ----------

How to setting this bov blitz??

Siri bercakap dengan HP sendiri...

try the screw at the top.

 

[budakkampungaje]

yup.....jack up your car, go underneath, start your engine & get someone to rev your engine while u hear where the sound is coming from.

---------- Post added at 09:05 PM ---------- 6 hour anti-bump limit - Previous post was at 09:04 PM ----------



try the screw at the top.

The screw must be short or long?
Ok I will cek that exzos system......

Siri bercakap dengan HP sendiri...

 

[vr2turbo]

The screw must be short or long?
Ok I will cek that exzos system......

Siri bercakap dengan HP sendiri...

Yours got 2 screws? Normally the one which a locking nut....

 

[budakkampungaje]

Yours got 2 screws? Normally the one which a locking nut....

That 1 laa with nut lock....that screw can adjust long and short.....I adjust that long....its that for thighten right?

Siri bercakap dengan HP sendiri...