Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="julie2121" data-source="post: 1468386" data-attributes="member: 6680">ok , now i know wat u mean. for the rear suspension u need to put some $$ to custom the absorber n the coil. small matter onli.if the engine cause u weight , to overcome it just install the suspension sys from the half n ur problem is solve. if u say the nose is heavy then the engineers from japan is useless. no worries , i think u should install the suspension system from the halfcut first. if u think is not too suitable then look for adjustable absorbers. hard to control ............if the engine is too heavy with low horsepower the car will b for sure hard to control. now ur car is about 200++hp and u need a better suspension sys (performance) so that u can control the car.i realy recommend sr20det riders, to install 17" rims. this is cause ur engine torque(pickup) is very strong when the turbo kick in. just recommend onli.if u have any problems do feel free to give me a call at 012-3355 352 ( tannie tam)andy : so this sr20det monster 16" with 60 series tires will make the car sway from side to side more coz the tire is too thick. they need low profile tires so that they can grip more during corners. in the other words give more stabilty.</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Monstrous AMG GT R's ACTIVE Aerodynamics explained!

You all have seen it. The Mercedes-AMG GT R is an absolute Green Hell beast that could tear the tarmac...

Random Shot: Personalized Gallardo with Orange accents

'(00): Lambos are everywhere in KL. The ones that truly stand out are not just the latest incarnations of the bull but...

Best Exhaust Manifold Design for Evo 4-9?

1. Symmetric V-Shaped to Turbine & External Wastegate
Internal wastegate/actuator will release air at a maximum of how much boost pressure? 0.8, 1.2 bar? An option to increase boost levels is to use external...