Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kyheng" data-source="post: 1259905" data-attributes="member: 13624">Because you never ask them to do it, anyway if add another hi-low, means you have to buy another RCA cable. But then you have more control if add another hi-low. You can control your fader as I said earlierSince now you only have 1 pair of pre-out to your crossover, maybe some selector was turn off, that's why you lost your bass. If you can accesss to it easily, then is time that you learn DIY. Normally, all the gain setting you should put to 30-50%, then turn on your HU to play some songs. Then the sub should put to minimum from the knob, then adjust your treble, mid, bass. If the front speakers is too loud, you can reduce the gain, this same to rear.The x1(softer) or x20(louder) is the power setting I guess, you can try play around with it. The sub phase is normal(0deg) or reverse(180deg).</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Launched: BMW's front wheel drive X2 arrives Malaysia at RM320,800

Launched: BMW's front wheel drive X2 arrives Malaysia at RM320,800...

Bike cop shows how it’s done on two wheels w/video

https://www.zerotohundred.com/wp-content/uploads/2011/07/biker-600x327.jpg

We’ve all been enthralled with Ken Block’s antics, from high speed drifts on banked surfaces to more donuts than a Krispy Kreme factory but...

FINALLY!! Your reliable source for all your rotary needs...

Greetings ZTHians (especially all rotary/wankel kaki’s!),

Firstly, just a quick introduction of my humble self. The name’s Edwin, involved a little bit in motorsports (drag racing) and a supplier for used engines...