Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="wil_alastor" data-source="post: 2173435" data-attributes="member: 43142">Sorry newbie here tumpang lalu..Of course B16a/b can rev high with less vibration,friction,sidewall-load to the cylinders due to their rs ratio and less rod-angles(1.74:1 & 1.84:1) while b20B/Z and B18A/B (on their standard stroke) are only 1.54:1 and was built by the manufacturer without vtec. 1.75:1 is considered 'ideal' by some engine builders and some of them do believe if below 1.61:1 (with the exception of stock B18C & B18C-R with rs ratio of 1.58:1) , the use of good n strong conrods,bearings,headbolts are recommended. I dont think u will 'miss' the excitement of b16a's high revving when u plonk in a B20/18's bottom end. Technically speaking, at 7krpm B16A's 81mm piston only travels 18m/sec while B20 with vtec head already reaches 20-22m/sec (depends on it's strokes,piston diameters,bottom end internal weights etc). If you're afraid of vibrations during high rpm when using above 85mm maybe you can afford an Endyn rods to hold the cylinders if resleeving and blockguard isnt your option.As for camshaft ,valvetrains,piston diameters,piston selections, static & dynamic compressions,wrist pin locations,a/f ratios tuning,ignitions,fuellings,ITB goes , many SIFUS here including you yourself had discussed earlier. But if u're planning to only use the stock 137mm rods and headbolts and stock camshaft (?) maybe b20s sifus can help u to choose a relevant piston and their sizes and it's redline range for your wallet-safety purpose.The risk is always there, if Kaboom just build another...even F1 engine 'kong' sumtimes.Pls correct me if im wrong..peace.RALAT ITU NORMAL.sacrifice oil consumption</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

The Porsche 918 Spyder in detail

http://www.zerotohundred.com/?attachment_id=19901

While the gist of the Porsche 918 Syder may have already been laid, an exclusive from WorldCarFans has us delving a little deeper into the hybrid drivetrain and its...

where can i find federal tyres in perak?

where can i find federal tyres in perak?any 1 know where can find it?i want to find federal 595 EVO tyres...205/45/16...any suggestion?

( wiring ) VR4 vs Evo

cancelled

bro's

would like to know is it necessary to change stock vr4 wiring to evo wiring?
plan to install emanage and boost controller.