Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 2098672" data-attributes="member: 27518">Actually just sold off my 2L block last month.. so delayed yet again.. :PCompression ratio doesn't give any ideas on exact valve clearance. Depending on how much stroke you have on the block, valve clearance could be a little or a lot. It's actually quite clear from the formula. To increase compression ratio, you can do two things... reduce the CCV, or increase the SWEPT VOLUME.you calculate it using the formula in the excel spreadsheet below.. I made it simple so I can use it and not need to remember stuff.Compression ratio doesn't give ideas about valve clearance. It gives the idea how much air your engine compresses in perfect a perfect 4 stroke engine (which also means that the numbers mean shit, since valve opening and closing timing affects these numbers in reality)And yes, SCR (static compression ratios are ridiculously high so that you don't have poor compression ratio with larger cam durations)The formula is there as well, if you want to do it the old fashioned way with a calculator.Do note that the numbers are NOT to be USED for your application.. the CCV you can use, since I got it off c-speed's CR calculator.. piston dome you have to find it out the old fashioned way.. a buret, and a perspex.*post the xls spreadsheet later.. editing out some stuff*Sorry again.. I knew I should have measured before shooting my mouth off.. :P</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

BCNR33/33gtst

Hi guys, just wondering can a BCNR air diversion panel fit r33gtst? Thanks

Emanage Blue for FD1

Would like to know if emanage blue compatible with FD1?
Any FD1 user installed emanage blue? If yes, any problem encountered?

Coz i would like to install one.

about BOV/wasgate/actuator...

newbie in turbo field...so would like the sifus to tell me the difference in a blow off valve and a wastegate and actuator? i'm getting more and more confused as i read more :lol: to me it seems like they all have...