Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="jugbugz" data-source="post: 2406732" data-attributes="member: 30892">As for dyno figures, no its in HP figures on a stock K20A.It's really normal nowadays to hear crazy fugures all over the world. My 270rwhp E46 is actually 300rwhp in US. I've heard of DC2R stock making 120hp at the wheels as well. It depends on the dyno and location. I know US figures show approx 15% drivetrain loss on dyno, but overhere in AUS it's 25% minimum. I've seen stock 400hp V8's making only 300whp, which is about 25% difference.This arguement between US figures and AUS figure has been raging on for years and has been lefted. No one in US could calculate/understand how a certain e36 M3 made a 12.9sec 1/4 pass with only 260hp at the wheels in AUS. All of them in US had 300+whp in order to do that. Dyno figures don't tell everything, just a measuring tool for mods. I'm sure that our 150 whp cars is just as fast as your 180whp cars.oh, btw, do you know the stock compression figures per cylinder on a B16B? Is it about 200psi?</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 17x8jj...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG3...
- Started by david tao
- Chassis and Wheels
original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Merdeka Plan?

Any plan for merdeka?
konvoi to anywhere or something?

lancer suspension

anyone here change their original suspension or spring for lancer glx......How the performance?

exhaust setup for gsr

guys, wats the recommended exhaust setup for a standard gsr? using the original route or getting a 4wd tank for direct piping thru the center?? will there be any differences in terms of performance?? pros and cons of...