Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Zenn" data-source="post: 1111778" data-attributes="member: 15503"><p>i think the ready made boxes u keep buying are not built for sound, just for show. do some research on box building (design, size, port size, tuning frequency, download WinIsd, get t/s parameters for your sub, etc etc) u should be able to get what u want, and then go to a shop that can build a good box for u....</p></blockquote><p></p>

Verification

The Marketplace Latest

Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

GS300 brakes

Hi guys,its me again..
I am looking for a used GS300 brakes,complete set callipers and rotors.
Most of the kedai potong i went to does not carry Lexus parts,im sure theres a few chop shop that brings in Lexus...

Different tyre series front and rear?

hai guys..

can i use a 50 series in front n 55 at the back?..or should it be the other way around?..

thankx guys..

wtf! radiator bocor!

my radiator fan was moving pretty slow, so i tot i recon it, but in the process of taking it out i broke the radiator as well since it is quite old already. so end up fixing 2 things.

1) take the pipe loose. both...