Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kennethfong" data-source="post: 2002407" data-attributes="member: 4371">kk,the site u posted is a subaru STI forum, it may or may not apply 2 our mitsubishi, but one thing that we can apply is the relocation of MAF like wat they said....however, i've asked around many ppl including some US folks in some DSM forums, also the famous boschur racing in US for some related MAF Translator products, all the conclusions come back to me is that the relocation of our mitsubishi MAF for a blow thru will have few probs, one is the accuracy of data sensed by the air flow, it may go haywire or providing inconsistent data which is dangerous, remember we need consistent high air flow feeding the ECU at high revs, this is to instruct the injector to 'ejaculate' more fuel, if this fails or something goes wrong somewhere, ur risking ur pocket on an engine overhaul....another problem for MAF is we need the honeycomb to make the air shooting straight, there can be no room for turbulence coz the MAF can't read the air properly, n u need 2 b sure if those are OK, another prob might be there might be oily residue of particles within that particular pressurised chamber, so this might kill your MAF quick...in a perfect world, relocating ur MAF should be done just before the throttle body, i would prefer the BOV to be installed before the MAF to cure for unmetered air disease as we've discussed....</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Desert Duty: VW's rugged Beetle Dune now in Malaysia - 50 units only!

Volkswagen Passenger Cars Malaysia (VPCM) made a surprise launch of the new Volkswagen Beetle Dune. Manufactured in Mexico...

best ecu for 4agze

m doin some research and some shoppin round for an ecu, i need it for a 4agze that im puttin in2 my rolla, its pretty much standard, but has extractors, 2.5 inch sports exhaust n pod filter (not much really), in the...

Suzuka Battle - Manufacturers Race Cars

http://www.youtube.com/watch?v=khgStA6C29U

Must Watch!