Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="D7zul" data-source="post: 1064041851" data-attributes="member: 111992">some thing to share.."270 degrees duration: This would be a cam upgrade to either 270 or 272 on the intake with the VVT still intact and 270 to 280 on the exhaust. Running VVT with a pair of 270 degree cams with the right grind will lead to no power loss at all anywhere in the rev range, instead it will help with the mid range and also at the upper end of the rev range. Changing to a 280 degree grind on the exhaust side should in theory lift the power curve higher in the rev range, this 270/280 degree set should in theory be an excellent choice for most 20V owners."source : http://s-86.com/s-cams.html</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

M7 EMC on Nissan Sentra N16

Hi ZTH Bros,

Need advice on the following queries:

1. Is it true that EMS control of ignation will cause coil to burn out in Nissan Sentra N16?

2. If so, how to go about it?

3. Had the following installed in my...

oppinion on SR20DET S14 on Cefiro...

guys....i think i am blur abit...currently i have RB20DET in the hood....but now i think is going to end its lifespan...

first..i been poison to go for 1JZ..but maybe will not suit my driving style...beside got...

WTA: Suitable lube for 4G63T?

What is the suitable lube for this engine? Someone told me fully synthetic lube isn't suitable because the vecosity is too low... is it true? Currently using Mobil1.