Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gavan" data-source="post: 836694" data-attributes="member: 2598">actually,it all depends on your driving style, when using a 4-1 extractor, mostly people would use this setup if they are going on track often where they really push their engine to high revs and stays around high revs most of the time. 4-2-1 extractors are mostly for daily driving cars, where mid range and low range power is needed(traffic jam and all) cause if will give you some back pressure to go at low RPM.why i said 4-1 extractors are used mostly for high revving engine if because when you high rev, you need the air to travel fast(not comparing stock 4-1 extractors here as stock 4-1 extractors are designed differently from aftermarket ones) so the air flow is slightly more free and those 4-1 extractors, each individual pipe before it reaches the 1 piping is longer, way much longer compared to those of a 4-2-1 extractor where the 2 is longer than the 4 ;) thats what i have observed when i see 4-1 and 4-2-1 aftermarket extractors.anyhow also, please do make sure the extractors you are getting are good design ones as badly design extractors would only increase your fuel consumption and sometimes, dun even give you that extra power you are loking for ;) happy hunting ;)</blockquote>

Verification

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body
original TWS Taneisya P1 racing 17x8.5jj offset +28...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Urgent =.=

I m looking for mr2 sw20 power window motor 1set......................any1 have?
Please contact me at 017-9026644 (tan)
thx

ER34 GTT oem front suspension

Hi all,

Anyone here where can i get GTT oem parts from?

I am looking for 1pc ER34 GTT OEM front suspension.

Thanks all.

MR2s in Action !!

Please post any news or events where MR2s are in action, on display, exhibiting, GRA, SSO...etc...we'd like to come support if we can. Da MR2 brotherhood..

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...

BRAND NEW original rare Yokohama ADVAN Racing RG4...

original rare Yokohama ADVAN Racing RZ2 RZii...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Rays Volk Racing TE37SL 18x9jj offset...

Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R

Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...

Honda Jazz/Fit GK Mugen body kit

original TWS Taneisya P1 racing 17x8.5jj offset +28...

Posts refresh every 5 minutes

Recent Posts

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

AMPANG mari!!ZTH member

Search

Online now

Enjoying Zerotohundred?