Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="donCityZ" data-source="post: 1715566" data-attributes="member: 22885">the heat is kept at the extractor pipe instead of being blown by high speed wind.this more applicable when u r high speed. the fast wind will blow the extractor directly without the foil and will ultimately cool down the extractor temperature = lower pressure.. power loss at high speed. i could feel that at high speed, my car power does improve after puting the foil.oh well.. if u skeptical about it and many doubts, dont do it la..im not forcing u or anyone. just providing cheap solution and ideas for those who want to try. after u try, u feel not improve anything, u can simply take it out and just loss a few bucks. from my own testing, it does work.1. before put foil, at idling i put hand above extractor can feel heat very hot.after put foil, the heat feels much less and my hand can leave above for longer time.2. before put foil, at high speed acceleration is a bit lagging even at same rpm when at lower speed. after put foil, acceleration at same rpm at different speedare almost same.up to u ma...</blockquote>

Verification

The Marketplace Latest

Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels
Endless Racing Mono6 + Racing Mono4 R35 GTR GTR35...
- Started by aycy
- Engine and Performance
WOT Dual Oil Cooler Kit Civic Type R FL5
- Started by aycy
- Engine and Performance
Mugen MF10 Black Edition 18x9.5J+45 FL5 FK8 Type R...
- Started by aycy
- Chassis and Wheels
BBS RI-A God Spec Civic Type R FL5 18x10j+40
- Started by aycy
- Chassis and Wheels
HKS Oil Cooler Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
MITSUBISHI / FE658 (RB/BK S2S)
- Started by PIstonHeads
- Chassis and Wheels

Posts refresh every 5 minutes

DIY paint engine cover

i own a mivec wit a black cover and rusty metal engine cover, now i planing to repaint myself, first question wat chemical solution that i need to use to wash the metal engine (writen "DOHC 16V" ) to blink blink...

SSC Ultimate Aero TT Averages 255 mph in Top Speed Runs

http://www.shelbysupercars.com/images/world-record.jpg
Shelby Supercars (SSC), manufacturer of the ultra high-performance Ultimate Aero Twin Turbo, set the new "World’s Fastest Production Car" record earlier today...

what to do with 'damaged' screw?

hi all...

just now i try to take out 6 screw to remove and replace the camm cover.. :(

then one of the screw too tight
when i screw
cannot open

then the '+' gone already.. become 'O'
what to do...? :(

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

Carbing R35 GTR GTR35 Brake Master Cylinder Stopper

GR Corolla Hypertune Bolt On Intercooler

Carbing Radiator Reservoir Tank Honda Civic Type R FL5

R35 GTR GTR35 Rim Wheel TE37 Track Edition

Endless Racing Mono6 + Racing Mono4 R35 GTR GTR35...

WOT Dual Oil Cooler Kit Civic Type R FL5

Mugen MF10 Black Edition 18x9.5J+45 FL5 FK8 Type R...

BBS RI-A God Spec Civic Type R FL5 18x10j+40

HKS Oil Cooler Honda Civic Type R FL5

MITSUBISHI / FE658 (RB/BK S2S)

Posts refresh every 5 minutes

Recent Posts

Recommendation: Turbocharger for 4B11 N.A engine

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

Search

Online now

Enjoying Zerotohundred?