DIY Ralliart bonnet vent

[sub8evo]

Just to share a small project that I did over the weekend :

I removed the vent, and clean & wash it thoroughly with car wash shampoo to remove grease and dirt.
Then, I cut out pieces of the Ralliart logo(this one DIY also...) and stuck it onto the vent.

Then I spray a can of chrome paint over the vent. I made sure the spray direction is at about 90 deg angle facing the vent, so that I'll get the masked effect of the logo on the vent.
I made sure not to spray too wet(i.e. not too close or too slow), and repeat the spray process after interval every 1/2 minute.

And... the result. Total cost ~ RM20

I think the result would look nicer on a black / dark car.

 

[Johnny_Tan]

nice one bro..

 

[p3jal]

cantik bro... if the ralliart u can spray like the ralliart color lagi cantik =D

 

[sub8evo]

cantik bro... if the ralliart u can spray like the ralliart color lagi cantik =D

Thanks bro.

The ralliart logo is masked one, so that part is the original bonnet vent color - black.

Unless I mask the whole vent, and spray special colors for the few lines...

 

[aycy]

saw the real one for sale at yahoo auction. almost need rm5xx.
RM20 is a good save!!!!