Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="12savefuel" data-source="post: 1064425734" data-attributes="member: 69762">My Cefiro and 20G emblem was in the wrong position as the previous owner repainted the car and the painter didn't stick it back the right way. Also the adhesive also was coming off as they used poor quality double side foam tape. So since the emblem was coming off might as well do it properly once and for all. Bought 3M Heavy Duty tape (the grey stuff with red plastic film) for rm17.50 from tesco. It was a pain to cut the tape to the correct shape but at the end I manage to do it. Wasn't perfect but good enough.1. To remove the old emblem I just used dental floss, slot it behind the emblem aand the tape nd start cutting the tape with the dental floss. 2. Remove adhesive tape using lighter fluid. I used a plastic scraper to help remove all the adhesive. The blue plastic tool you actually see there is a plastic automotive clip removal tool made by JTC and come in 5 different shapes and sizes. But have to be careful not to scrap too hard and inflict deep marring on the clear coat. 3. With all the adhesive removed, its time to clean the paint and do correction. I used an RB with LC white pad and Osren Crystal Cut 3.0. Took about 3 passes to finish it. Didn't bother to finish with a black pad as the clear is quite hard and couldn't really see any holograms or swirls left by the correction.4. Clean the surface with IPA ready for sticking the emblem.5. Measure up, get your lines straight and stick the emblem and you're done.http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250306Small_zps4810fa7b.jpghttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250302Small_zps310dce5b.jpgRemoving adhesivehttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250307Small_zpsf8023c3e.jpgAdhesive removed http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250308Small_zps92e7e30f.jpghttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250304Small_zps385f5c7c.jpg---------- Post added at 12:19 PM ---------- 6 hour anti-bump limit - Previous post was at 12:19 PM ----------http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250309Small_zps82970ad2.jpgCorrection finishedhttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250310Small_zpsb332dab3.jpgRelocation complete</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

N.GINE: Singapore's Latest Downloadable Performance Car Magazine! - It's Free!

We've just seen N.GINE mag on our iPads! This free, made in Singapore, downloadable magazine is the ultimate companion...

TT on the 20OCT06

Everything about Teh Tarik Sessions - Post Here!

Ok. next TT on 20/10/06 to discuss about The Raya Run. Shell, TTDI 10pm

1. midship
2. TheFalcon
3. Marcus
4. Cyne (sure come liao) hahahah, why always Shell...

MODS for big horsepower

what are the mods we should do for big horsepower?
for eg. like changing to bigger turbines,pistons,high cams,metal gaskets,external wastegates...what else???

any advice pls..