Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="edmx" data-source="post: 748550" data-attributes="member: 15789">okay dude. heres what i did for my kelisa (my mom drives it now). go any hardware shop ask them for filling putty. the one i bought is called Hitary 228 from Nissan. made in malaysia, company name mercury paints. (but i wonder wut the heck is nissan for?) it cost around RM11. be sure to get a plastic spatula (i think thats wut u call it) as well. what i mean by spatula is the one construction use to cement one. better example, burger stalls that uses it to flip burger.be sure to stir first before applying on to the body. becoz if it is not perfectly mixed, it will drip. and dont be so careless. do it gently and with highest level of patience you have. it not... cacat la your car. yes it will touch some of you car metal surface. its better to have a wet piece of cloth so you can wipe of the unwanted putty.once done. leave it to dry. besure to check the weather first before starting ur work. if raining.. kene la you. final step, get a sand paper, not too rough and not too smooth. better yet buy both. spend an adequate time smoothing you car kit surface. if not.. spoil your paint job. leave it for a day or two to dry. i know... most people laugh at my car when it has white spot everywhere. dont mind them. once you confirmed its dried, start masking taping the whole area you plan to spray. put paper if have to. the spray like crazy~ be sure to maintain around 1 feet from the surface. dont stay at the same area longer than 1 sec. it will start to drip. just go by layers. left to right or right to left. let it dry. then again. left to right or right to left. do around 3-4 layers. if cun enough 1-2 layers can finish already. leave it to dry okay. because ur not using oven to bake the car and to let inside layer to dry before applying the second one. trust me, it last longer then just doing it one shot.find a blade or a cutter, the go thru the masking tape edges gently. the idea is to retain the color and does not peel off as you start peeling you masking tape. again, do it carefully.thats about it. my crucial piece of advise, patience in essence! if you cannot tahan, then sent to spray loh. what to do?</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Altezza Eyelids

Hey guys,

What do you think of this item?? Planning to get this soon....Its CF eyelids....

Skyline Vs Supra

Skyline vs Supra both also got about 1000bhp...If got comment plz be sure to post dont be shy!!!

http://www.supersupra.gtahoodz.com/logging/check/Frost_SupraMkiv_VS._Kiesa_SkylineR34..wmv

Where Where Where Where

Anyone know where is the best place to tuning RB20