Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="johnsonlam" data-source="post: 1064381425" data-attributes="member: 345">Was walking about Low Yatt and saw some good offer for Neon Lights. 70% off :D This DIY can be argued to be Ah Beng or as a cool decoration.. but whatever it is... :P as long as we are happy can liau la.. http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons001.jpgThese are standard PC neons.. This is from Cooler Master. Since I did not modify my computer ever since busy working with company notebooks.http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons002.jpgAs this was for PC, there is a controller box with a PC back panel... Simple.. I took the panel out by removing the 2 screws.. and I bang them using a hammer and install it back (Steps not shown).. NOTE : do not bang them with the PCB circuit on to avoid breaking it.http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons003.jpgI am pulling the power from the wiring to Ciggrette LIghter Socket... Removing the panels to it is soooo simple because I already learnt it the hard way from my DIY-AUX Input tragedy.. hahah.. Just need to remove 2 screws.. the rest are just SNaped ON.http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons004.jpgTrial Run after I strap it on.... Okie.. looked good.ahem... the hard part of the installation wasn't shown here.. that is to have the main Neon ballast to be nested behind the dash... and the 2 wirings to the neons pushed thru.... http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons005.jpgThis is almost the part where it is almost completed.. You can see that I have removed the sound proofing to enable me to TIE the neons on it. The controller is seen here.. dangling.. not fasten down yet.http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons006.jpgSound proofing installed to the original position, The controller also fastened using Double Sided tape.http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons007.jpgPicture showing passenger side's neonhttp://forum.lancerzone.com/gallery/albums/userpics/10800/Neons008.jpgThe controller box looked too.. revealing as it was Silver in colour.. Should have sprayed it first... so I "Stealth" it by adding Black Matt Stickers...http://forum.lancerzone.com/gallery/albums/userpics/10800/Neons009.jpgDONE... looked not so obvious now.. hahahahttp://forum.lancerzone.com/gallery/albums/userpics/10800/Neons010.jpgCheck out the video of it working and blink syncing with music. [youtube]QZ1cboouECc[/youtube]</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

FAQ : Tuning & Management

Feel free to add links to informative and productive threads

Types of EMS...

New BMW M3 E92:First Drives

http://www.imagebanana.com/img/32u7kcrc/BMWnewM3dr_1.jpg
The E92 model is the fourth generation of the M3. When it goes on sale in the UK in early September, the M3 will cost £50,625 and will, at first, be available...

spark plugs.......W8DC

im using a 1983 e28........
how to cuci da spark plugs?

the plugs are
SPARK PLUGS BOSCH SUPER BP5ES
W8DC

can sum1 teach me any other ways to wash the plugs?
the technique im using now is
i first wash it in...