Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Tom" data-source="post: 46764">Hi guys,I finally did my AFM to MAF Conversion I love it so so much. The response is just fanstastic. no more stupid AFM flap to restrict the flow, most people who are like me would know that the revs will drop below idle sometime if we quickly depress and press the accellerator pedal. it's gone now and the air flow is just awesome. you have to feel it to believe it man.ok, let's talk about how it's done,i bought a 1998 E39 525i Siemens MAF, an aluminium connector hose, a silicon connector, and a 3" inlet Pipercross air filterYou need some sort of a chip or A/F device to tune the ECU to recognize the new air flow device.In this case, the Unichip and Unichip tecnician did all the signal adjustments, conversion and a/f settings. The plug to to the MAF will tap the ones from the former AFM and modified slightly. Air Temperature sensor isn't use in my application. instead, the ohms of a wire were changed to "cheat" the ECU of the air Temp sensor being there and there's only 1 reading which is a permanent reading that will never change according to temperature. Plus the air Temperature in Asia don't vary much, so i'm not worried about it.it's quite techincal which i ddin't really get to absorb much. anyway, i gained 5RWHP on top of the 160RWHP i had before MAF which was pretty good. but what's important was the engine response that i'm really happy with. No graphs and charts due to the faulty printer..but there are pics. so enjoy!cheersTom http://www.zerotohundred.com/forums/uploads/post-37-1079605364.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605448.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605498.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605534.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605634.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605665.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605760.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605790.jpg http://www.zerotohundred.com/forums/uploads/post-37-1079605846.jpg</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Looking for supplier

Hello everyone,
sorry if i posted in the wrong forum :confused:

but i really wanted to know if anyone has or know any tyres wholesales company to deal with abroad bussiness.
pls point me the right direction on my...

Jean Alesi + LRGP Evora in All-Lotus Drive To Genting Highlands

Just a couple of weekends ago, we were invited to participate in a Lotus Cars-only drive to Genting Highlands along with...

trade super advan racing rims ver.2

hi, i was just wondering if theres anyone interested in trading my super advan racing version 2 18 inch rim fr 8.5j and rear 9.5j with ofset +38 for

1) 18 inch gtr rims offset +30
2) 18inch TE37 18 inch offset +12...