ECU...fuel flow...

[12oY]

Tyr this link... can we D.I.Y it??? mean increas the fuel flow....

http://www.stevetek.com/R-FuelSys.html

http://www.tmo.com/theory/myth/ecureset.htm

 

[12oY]

for addition info for 4G15P......

Fuel Pressure With Vacuum Hose Disconnected 1.5 & 1.8 47-50 psi (330-350 kPa)
With Vacuum Hose Connected ~38 psi (~270 kPa

 

[12oY]

i have try.... by reduse the vacum of the fuel regulator hose bt adding a air valve... it work pretty well in low rpm but not in high rpm form 4600 to 6500 rpm... it kind like the engine jerking maybe of not enought fuel supply enought to the engine system....but if i incerase the vacume by close up abit the air valve it work better in high rpm but is not as good as b4 at low rpm......maybe i will post the pic soon...

 

[ksgoh]

it seems have to put some times on this......how long u take to finish it??

 

[drexchan]

Guys, http://drexchan.fotopic.net/c345841.html, something similar to the mod posted above. It's now in my car.

 

[InitialD]

drexchan, I noticed on ur website ur proton has Angle Eyes. Is it DIY or was it part of the new spot lights that you installed to your car?

I am referring to http://drexchan.fotopic.net/p8835537.html

Where did u buy those fog lights? How much?

 

[drexchan]

I am aware that the angle eyes can be DIY'ed. But i got it as part of the lights. RM120 including installation. But i believe that most of you guys here are DIYers so it's better to get the lights and DIY the installation. The instruction and electrical diagram is on the packaging.

 

[12oY]

wah that cheap le ... i saw b4 got waja install.... dam cool .....