Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Kobra" data-source="post: 3842878" data-attributes="member: 60348">The Campro engine is the first automotive engine ever developed together with Lotus by the Malaysian carmaker, Proton. The name Campro is short for Cam Profile. This engine powers the Proton Gen-2, the Proton Satria Neo, the Proton Waja Campro, the Proton Persona as well as Proton's future models. The Campro engine is aimed to show Proton's ability to make their own engines that produce good power output and meet newer emission standards.All Campro engines incorporate with drive-by-wire technology (specifically electronic throttle control) for better response,[1] eliminating the need for friction-generating mechanical linkages and cables. There have been some issues with cracking oil pumps but apparently Proton have introduced a new part recently to solve this problem. A recall has not been announced.The Campro CPS engine uses a variable valve lift system (Cam Profile Switching system) and a variable length intake manifold (VIM; not to be confused with the stand-alone IAFM used in the 2008 Proton Saga) to boost maximum power and improve the CPS engine's torque curve over the standard DOHC Campro engine.The engine's Variable-length Intake Manifold (VIM) switches between a long intake manifold at low engine speeds and a short intake manifold at higher engine speeds. Proton is using a longer intake manifold to achieve slower air flow; as they found this promotes better mixing with fuel. The short intake manifold allows more air in faster. This is beneficial at high RPMs[2].The Cam Profile Switching (CPS) system uses a trilobite camshaft to switch between two different cam profiles. One cam profile provides low valve lift, while the other cam profile has a high valve lift. The low valve lift cam profile is used at low to mid engine speeds to maintain idling quality and reduce emissions, while the high lift cam profile is used when the engine is spinning at mid to high engine speeds improve peak horsepower and torque[2]. Unlike the other similar variable valve timing systems such as the Honda VTEC, the Toyota VVT-i and the Mitsubishi MIVEC which use rocker arm locking pins to change the valve timing, the CPS system uses direct-acting tappets with locking pins to change the valve timing and lift profile.[3]VIM switches from the long to short runner at 4,800 rpm, while the CPS system switches over at 3,800 rpm (4,400 rpm in the Proton Satria Neo CPS[4]). The result is 125 bhp (93 kW; 127 PS) at 6,500 rpm and 150 N·m (110 ft·lbf) of torque at 4,500 rpm compared to the non-CPS Campro’s 110 bhp (82 kW; 112 PS) at 6,000 rpm and 148 N·m (109 ft·lbf) of torque at 4,000 rpm[2]. Proton claims that there is better response and torque at low engine speeds of between 2000 - 2500 rpm.The new CPS engine first made its debut in the facelifted Proton GEN2 launched in Thailand[5][6], and made its first Malaysian debut in the Proton Waja Campro 1.6 Premium (CPS)[2]. Besides the 1.6L version, the Campro CPS engine is also available in 1.8L version; however, the bigger 1.8L version has not yet debuted in any of Proton's car (as on 30 April 2008) but rather made its first debut in a Malaysian-made hovercraft.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

turbo charge sgti 4g93 siemens

anyone here knows good place to turbocharge sgti with siemens?

WTB: EVO V Rear Wing

Hey guys,

Anybody got a spare EVO V wing sitting around or know of one that's for sale, lemme know, please.

Like, if you've seen an EVO V rear half cut ke, lemme know also la, right?

Thanks!

Z-tune Writeup

http://blog.gtroc.com/dino/2005/04/nismo_skyline_g.html

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...

Honda Jazz/Fit JSracing GTwing Spoiler

Toyota Vios NCP93 front bonnet hood

Honda civic fc varis spoiler

BMW F10 Msport front bumper set

BMW F30 M3/GTS front bonnet hood

BMW F10 vorsteiner rear bumper diffuser

Mitsubishi Lancer Evo bodykit

BMW F30 M3 front skirt lip

Honda Civic FC fk7si front bumper set

Posts refresh every 5 minutes

Recent Posts

Darker Design : Mercedes-Benz Launches GLA Nightfall Edition in Malaysia

Honda Malaysia Doubles Down on Hybrids: New CR-V Launches with Dual e:HEV...

BateriHub Reaches 200-Store Milestone, Becomes Malaysia’s Largest...

Been stalking for 3 years edy

Recommendation: Turbocharger for 4B11 N.A engine

Search

Online now

Enjoying Zerotohundred?