Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="romen_" data-source="post: 3136053" data-attributes="member: 17224">[fixed] Emanage Blue - Main Unit Update FailedHello all sifus + pros,a little background of the car; I'm running a myvi 1.0 (ej-ve) with a bawah-pokok style bolt-on supercharger, boosting a low 0.4 bari've been using emanage blue for around 6 months now, with tuning previously done properly on a dyno. Car runs good + rich on boost, no major issues :DNow, i got curious on how to DIY a e-manage cable, so i followed an online guide using a DKU5 cable. I was successful with the cable, but i think i messed up my EMB.Here's a step-by-step on how i messed up my emanage:-1. Connect diy cable to both laptop and emb2. Turned ignition to on. Active light was green.3. Started the Emanage Support Tool (v1.49).4. The Support Tool program immediately asked me to perform a Main Unit Update, and I selected the 'GSC01.p' file.5. Transfer starts. 6. EMB Active light is a solid green, USB interaction light is off. 7. Progress reaches around 00:25 secs, with around 5-6 blue blocks.8. Support Tool program says "update failed". EMB active light is off, USB interaction light is orange.Then i attempt to retry it. When i turn Ignition to Off, then On again:- 1. EMB Active light flashes red, green and orange.2. I try to repeat the Main Unit Update, the sequence from earlier (5 to 8) repeats and fails. 3. Tried again for another 20 times, still fails at the same time / block.Question:1. Will doing a "Main Unit Update" wipeout my maps?2. What does the flashing green, red and orange Active light mean? I know error codes should be all in red.3. What are the steps to update the main unit properly? Also, what is the recommended Support tool version (I have v1.11, v1.13, v1.20 and v1.49), and what is the best firmware (I have v1.39, v1.40, v1.49)?After some study, I realised that when I used Support Tool v1.49 with included firmware 1.49, the program will check the current version stored in the e-manage itself, and attempt to update it to a newer one.Possibly if i have used an older program, then I will not have faced this issue. <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/banghead.gif"  class="smilie" loading="lazy" alt=":banghead:" title="Banghead    :banghead:" data-shortname=":banghead:" />Ah well, nasi sudah menjadi bubur; hope someone here in ZTH can give me a hand! Thanks! :D</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Review: 2017 VW Tiguan 1.4TSI Comfortline First Drive!

Yes, there's quite literally nothing from idle, right up till a couple of hundred revs before the 1.4L TSI compact SUV...

Shell Helix Invasion Tour 2011 – Leg 1 | Part 2 Hatten Square to Gelang Patah R&R

From Hatten Square, the supercars regrouped before the convoy proceeded out of Malacca Town, reinvigorated by...

Honda and Mazda get in bed for a B-spec showroom racing series

http://www.zerotohundred.com/?attachment_id=17156

Keeping the cost of racing down is one way to get more masses to jump in the driver’s seat and scratch that racing itch. However, it’s no secret that racing is a...