Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="InitialD" data-source="post: 4006774" data-attributes="member: 4678">What's hard to believe? You can watch the bearing friction test in the videos posted earlier.By the way, a few years ago, I saw with my own eyes a similar bearing friction oil test done by a salesman for Texas Revolution Titanium Oil.The salesman did the same test using popular oil (like those mentioned in the article) and true enuff, with certain engine oils, there were some very bad friction marks on the bearings.Then when the salesman repeated the same test using Texas Revolution Titanium Oil, the wear mark was very very small. He even did the test by removing the oil from the pan and another test with water mixed with their oil.So guys from my experience, I believe this bearing friction test is real.Below is a link to a video of a bearing friction test shot with my own handphone:http://www.vimeo.com/154936</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Involuntarily volunteered experiment

A good friend the other day took the opportunity to 'volunteer' my car to test a gadget he had fashioned out of aluminum and some rubber. A...

Greddy Type-R BOV installation and issue

Hi,

Just wondering if anyone has any idea's on proper installation of the Greddy Type-R bov (enhanced springs) on RB26dett. The bov is installed after the i/c, before the intake plenum. However, the bov does not...

WTB: Mit. Evo 7 Unreg only

Hi guys,

Im looking for an unregistered unit of an evo 7.

If anyone knows where i can find one pls advice location and contact details.

If you have more info also better, price. colour, pic, opinion on cond...