Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="cosmicgate" data-source="post: 3420341" data-attributes="member: 18814">hello bro i can't say i'm a pro but gauging from your situation you should check on the followings:a)your AFMb)timing beltc)cam angle sensor (cas)d)clutche)aac valvef)compression?i know i had same problem before.Your case really sound like AFM problem and i dunno why u wanna install EIDS in the first place =-(.My case alot of mechanics check everything also can't find the problem, in the end i found out that if i press down the air filter the rpm is different, i let go, rpm different again. so i took out the afm, i check it, everything seems to be okay, clean it with carb cleaner, doesnt fix the problem. So i got bold, i took off the afm, cut open the afm to get to the board, i noticed that one of the wire inside has broken off. I googled around and found out that it is the signal feed wire, no wonder my car sometimes dun wanan start, stops at humps etc. I bought a cheap solder and solder that wire back and guess what? no more problems on my car! It is as simple as that! when mechanics can't even find what's wrong! Unfortunately u have to "cut" open the afm box to get inside loh, could be pretty tricky but if i can do it why can't you? another alternative is get someone which u knwo has good afm and change it and see if it fix the prob o not.i know another case, of my friend. He send to alot of mechanics all of them also scratch head dunno whats wrong.everything seems perfect! Until he got frustrated go back home, wasted all resources he really dunno what to do already so he got ambitious and open up his cam belt cover just to find his cam belt slacking like long foreskin. The belt is so stretched that it "jumped" tooth, causing all the silly stallings etc. He replaced the belt, adjust the cam angle sensor gues what? fixed it. Another case of, mechanics looks like monkey but he managed to found the problem out of ramdom luck.3rd case...same like timing belt case but somehow ur cas just "run" position because of timng belt stretch or cas not tight enuff? weird if u ask me, but there really is such case!!!4h case, really really weird case.Not really sure about this one but a misaligned clutch can cause stalling? Not sure about this one, but somehow i got a friend who changed clutch, after 6 months the gearbox/clutch starting to act weird. On 1st/2nd have to press gas pedal abit before release clutch if nto will sei for something like that...not really sure about this case can have a look also.5th case, aac valve dirty. Sometimes aac valve gets dirty because of years of usage and builup. Can cause hunting also if it isn't afm problem. You can use the "improper" way of open the gate of AAC valve bigger so can bypass all that clogging inside.Interim solution loh but if u want can take it out and give it a good cleanup. also then u need to tune it back to proper rpm.eg:disconnect aac valve feed, turn some screw in ecu full anti clockwise and plump in aac valve feed and tune.for more info google.com6th case is lousy compression in cylinder, or cylinder not firing at all. You will feel that the car is super suddering not because of the grunt of the engine but its from ur cylinder not firing at all or problem with cylinder. i THINK this is the most unlikely case lah coz im sure ur mechanic will know if he's a mechanic but....u wont know *roll eyes*by the way bro, just some advice from me, not really expert but i think these some pointers might help u on the look out at the more common "missed" problem.If theres anything wrong, please correct me！ knowledge sharing is caring!!</blockquote>

Verification

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...
- Started by david tao
- Chassis and Wheels
Hi, I am Chong, From Malaysia i want to...
- Started by irfanirfan
- ICE -In Car Entertainment
BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

TIMETOATTACK: Payments via Credit Card / Paypal Now Available!

http://www.timetoattack.net/wp-content/uploads/2012/04/paypal1.jpg

Hi Attackers and Track Day Participants, we have more good news!, You can now pay via Credit or Paypal for ease of payments. So how do you pay...

anyone know evo mechanic in malacca..

pls help...evo mechanic in malacca..????/

For Sale

Hi there,

all items sold

Thanks and best regards

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...

Hi, I am Chong, From Malaysia i want to...

BRAND NEW original rare Yokohama ADVAN Racing RG4...

original rare Yokohama ADVAN Racing RZ2 RZii...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Yokohama ADVAN Racing RG 16x7jj...

original rare Rays Volk Racing TE37SL 18x9jj offset...

Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R

Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...

Honda Jazz/Fit GK Mugen body kit

Posts refresh every 5 minutes

Recent Posts

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

AMPANG mari!!ZTH member

Search

Online now

Enjoying Zerotohundred?