Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kweng84" data-source="post: 3179181" data-attributes="member: 21172">Hey bro, im sure there is a lot sifu-sifu that could help you in this but they just not free to bump in this thread. Im free for now.Ok, 1.8 DOHC. Manual or auto?The sound comes like hitting metal plate is becoz the rear muffler has left very little of fiber and causes vibrations in the pipes in between of the resonator chambers. So, what u can do is:1. Add a bullet/center box.2. Change the rear muffler ( i wouldn't recommend a 2nd hand or used as most of them got problem with their fiber , then end up, u need to refiber them that the cost of refibering usually 80% of what u spent in the used muffler).. So get a good replica (new)...**U have flexipipe in between of the "2" and "1". So weird. Usually 4-2-1 ..then only FLEXIPIPE.. Can send me a picture??Extractor: I suggest 4-2-1 which is the best. Most extractors made now is hybrid 4-2-1 that gives the power u need in low end torque, mid and high end power. This is due to the curves, diameter of the extractor's piping and the length of the sections.Sound: QUIET, define quiet. Every people has different meaning of quiet. Quiet during idle but revv high, sounds come out. Is that so? Or quiet all the way? Remember, quiet like stock after changing new exhaust system is IMPOSSIBLE. Only stock setup can produce like stock sound.Twin Muffler: This custom twin exhaust system going need high budget and power wise, it improves your high end power , not the other way round. It is always made for decoration purpose. Think of it twice. Single exhaust system could give you sufficient performance and nice for decoration unless you got twin exhaust holes in ur bodykit work.That's my 2 cents. If i speak wrongly, feel free to voice out. Please call me as i wouldn't have much time in forums temporarily. Sorry for those i didn't reply yet, u guys can call me up or sms.Regards,K.Weng01256297130163462636</blockquote>

Verification

The Marketplace Latest

2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment

Posts refresh every 5 minutes

Jaafar of JFA Exhaust Sunway has passed away.

Just got news from KL. Jaafar has passed away. Great guy & a loss to the mod scene.

Lowering Advice Needed

hey guys,just asking opinions about lowering my car..coz the front of my car is higher than the rear..so,i need some advice about this..

Do i need to change the spring? Absorber? If i do,what type should i use? I...

possible to install VS on other place?

hi all

VS is many capacitors
connected to the + and - of battery
to . 'stabilize' the voltage? (supply voltage when there r extra need for a very short time)?

so is it possible to install on other place other than...