Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Cope" data-source="post: 2443294" data-attributes="member: 49998">Headers and extractors are one of the most cost effective way to release the pent up horses in your engine. The choice whether you get the 4-1 or the 4-2-1 depends on your preference where you wish your powerband to be.The exhaust system main priority is to release the burnt gas out of your cylinder as much as possible at the highest speed possible. So the material isnt a deciding factor unless you're talking about budget. A Mugen stainless steel header for the B18C functions just as well as the stock Type-R header (been there.. done that.. waste money). What's important to note is the overall size and length of the whole exhaust system from the header up to the muffler cause when i got my car.. the exhaust was of poor design.. (2.5inches diameter. Estimated cost around 300 something probably) and only later on that i changed it to a stock ITR header only. The rest from the collector or extractor to the muffler remains intact. Substantial increase of power can be felt all along the RPM range but the throttle response was still a bit sluggish. When i changed the whole piping to a smaller 2.25inch with Mandrel bending done on the curves that the engine finally feels and sound right. Finally, a good quality stainless steel header can cost right up to 1000+ but its the one most substantial performance mod that can be done and worth every cents.</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Mercedes F1 Car to Scream Across the Nurburgring with Michael Schumacher

https://www.zerotohundred.com/wp-content/uploads/2013/04/Michael-Schumacher-3-600x400.jpg

Back in 1976, the Nordschleife saw a terrible tragedy where Niki Lauda got into a fiery accident that almost got him killed...

Rally SparcoTarmac 16"

Hi All,

I've been told that Rally Sparco Tarmac 16" is a heavy rim. Do any sifu here have the weight info or advice?

power commander vs e.manage

can any sifuss tell me about power commander? :adore: