Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sakuraguy" data-source="post: 1725509" data-attributes="member: 6441">Bleeding from the Head or PalmBleeding from the head is usually caused by a blow. The scalp in particular has a rich blood supply and even a small wound can bleed heavily. The palm of the hand is commonly cut while cutting objects or through a fall. Bleeding is often severe as the palm also has a rich blood supply. There are many tendons and nerves in the hand, and wounds to the palm may be accompanied by loss of movement or feeling in the fingers. Signs and symptoms of skull fracture, concussion and compressionSkull fractureBruising to the eye socket Pain A bump or dent in the skull Straw-coloured fluid coming from one or both ears Casualty becomes increasingly drowsy and unresponsive over a period of time. Does she respond slowly to questions or commands? Is she having problems focusing? Concussion Pale skin Dizziness, blurred vision or nausea Headache Brief or partial loss of consciousness CompressionPerson becomes increasingly drowsy and unresponsive Flushed and dry skin Slurred speech and confusion Partial or total loss of movement, often down one side of the body One pupil appears to be larger than the other Noisy breathing, which becomes slow Slow, strong pulse How to treat head bleeds Treatment should include taking full details of what happened and checking for signs of head injury, such as skull fracture, concussion or compression. Help the injured person to sit or lie down. Check for any signs of head injury. Treat as appropriate. Using a sterile bandage, apply direct pressure to the wound to stop the bleeding. Cover the wound with a sterile dressing or a clean pad. Tie this in place with a bandage. Take or send the casualty to hospital as soon as possible. If the casualty becomes unconscious, monitor and maintain airway and breathing and be prepared to resuscitate as necessary.How to treat bleeding from the palmHelp the casualty to sit or lie down. Apply direct pressure to the wound and raise the arm. lf the person has had a fall, take care to rule out a broken arm or collar bone before raising the arm. Place a sterile dressing or clean pad in the hand and ask the casualty to grip her fingers over it. Bandage the fingers so that they are clenched over the pad. Leave the thumb exposed. lf there is an embedded object in the wound, treat the hand flat and bandage around the object. lf tendon damage means that the fingers cannot be clenched, bandage the wound with the hand flat. Treat for shock if necessary. Keep the casualty warm, at rest and reassure him or her. Support the arm in an elevation sling and take or send the casualty to hospital.</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

question for tyre sizes

if front use 225 45 17 and rear use 225 40 17 the gearbox will hv any problem? use at atr turbo

RX-8 Club teases with trailers for mega gathering showcase

[FONT=&quot]https://www.zerotohundred.com/wp-content/uploads/2011/01/rx8-600x360.jpg

It would appear to have been a busy year end of 2010 for the local chapter of the Mazda RX-8 club as the piston-less posse...

Ready 2 Race Turbocharger by Bullseye Power

Bullseye Power turbocharger Model S368 with race cover 9.5 inch compressor housing
suitable for drag purpose rated Hp 500 to 900whp

inducer 68mm with ETT technology by Borg Warner
Turbine Wheel 83mm
Turbine Housing...