Greddy High Cams for Honda B Series Engine

[jps.parts.andrew]

Greddy High Cams for Honda B Series DOCH VTEC Engine

Used Greddy High Cams(with Pully)with after market valve spring for Honda B Series VTEC Engine(B16x, B18x & B20x).

Greddy Cams: In 232/250/292 - 6.0/9.0/11.5 Ex 232/250/286 - 5.5/8.5/10.0

The Greddy Cams are 2 in front in the picture.

Very Unique.
RM 3,000 (negotiate)

Interested person please call 012-7755750 to contact Andrew or email to [email protected]

 

[integrist]

what's the spec? what are aftermarket valve springs you will include there?

Bump: what's the spec? what are aftermarket valve springs you will include there?

 

[vin2911]

yes bro what is the spec for the cam and what valve spring is that...

 

[jps.parts.andrew]

yes bro what is the spec for the cam and what valve spring is that...

Thanks for viewing my post.
In the Greddy Cam category, that is only one set of cam for honda B series engine. IN 232/250/292 - 6.0/9.0/11.5, EX 232/250/286 - 5.5/8.5/10.0.

And the Valve spring I can't definite whether is Greddy, but I am sure that is not the original Honda made valve spring.

Thanks. I hope I had answer your question.

Free Bump!!

 

[skunky]

i think the degree 4 intake is same like type R 11.5 n the extractor 10.
so, this cam same like type R cam. just the brand only.
good luck bro.
have a nice day

 

[jps.parts.andrew]

i think the degree 4 intake is same like type R 11.5 n the extractor 10.
so, this cam same like type R cam. just the brand only.
good luck bro.
have a nice day

Thanks for your post.

Yes, that are the similar degree as the Type-R cams. But, the important for a pair of good and performance cams have to also look at the Angle with the Valve lift. So, this pair of cams is not the best cams, but the performance will depend on a whole engine setting as well. And Greddy would not make the same cams as the Type-R into the engine modification market.

Free Bump !!!!

 

[jps.parts.andrew]

Brijng up my post !!
Free Bump !!