Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="seantang" data-source="post: 218975" data-attributes="member: 1589">"question - can my ori auto gear box (1.5) be used for gsr(1.8) engine?"I don't think you can. There are 2 things that control the autobox. The first is the TCU (Transmission control unit). It directly controls the behaviour of the autobox ie. when to change gears, when to kick down etc. The TCU needs to get sensor input (eg. throttle position, rpm, speed, load-vacuum/manifold pressure/airflow and brake) from somewhere. The GSR gets all it's input from the ECU (Electronic Control Unit which manages the engine and all the sensors). It is possible that your 4G15 is the same or it may obtain some sensor input directly from the sensors themselves but this is doubtful.Now, the trouble with using a gearbox/TCU from one model with an ECU from a different model is that (i) the wires connecting the ECU and TCU might be different ie. the socket pins have different configurations (ii) the TCU from the 1.5 might use more or fewer sensor inputs that the GSR ECU might provide (iii) the voltage of the signals sent from the GSR ECU to the TCU might be different from the voltages from the 1.5 ECU.So, it's always, always much, much less headache if the autobox, TCU and ECU come from the same model of car."for this i don have to lock my 4wd gsr auto gear box. any concern?"What's the problem with locking the 4wd autobox? It's a fairly simple procedure and there is no loss in autobox efficiency.The 4WD GSR autobox is built to handle 200+hp and 250+NM of torque. That's the reason it is matched with the turbo engine. Your 1.5 autobox is built to match a 80hp engine and 120NM of torque. How long do you think it'll last?</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Considering a Z31: kindly advise

Hello guys, just popping by to ask a few general questions. I thank you in advance for all the forthcoming advice and opinions.

Recently, I came across a Z31 on sale in Penang. It looks immaculate and well taken...

WTB RE-Amemiya Steering Wheel

Hi All,

I am after a RE-Amemiya steeting wheel. Prefereably in black with a blue horn button (similar to the one in the picture). I know it is a bit of a long shot, but I will also consider any RE-A steering wheel...

carbon fiber interior for gtt

does any know where can i get carbon stuff for R34 GTT?
3 meter holder, power window control panel, or maybe at the place for car player?