Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ftzone" data-source="post: 4166358" data-attributes="member: 9659">meaning to say the injector timing compared with microtech lt10 are as follows?270deg in Microtech is the same with 455deg in Haltech?90deg in Microtech = Haltech ? degBase Fuel Map and Ignition Map already tuned.Cool Correction - done...Transient Throttle - still playing around with itFull Throttle Map - almost there...Zero Throttle Map - done.However, when I lightly bleep the throttle from idle (1000rpm) to 3000rpm the responds is not so nice when I have tried almost everything to the base maps. There is like a small delay... whats wrong? But no problem from 3k rpm to 6k rpm. any ideas?</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Ecu tuning or reflash

Like the topic~ share with us like what ecu u r using? Where and who to tune? Cost ? And the result~

---------- Post added at 09:20 PM ---------- 6 hour anti-bump limit - Previous post was at...

Turbosmart Hologram Sticker

To all ZTH forumers,

Please ensure Turbosmart Hologram Stickers on the box and the product itself.
This is ensure you are purchasing from Authourizsed Dealers.

This message brought to by Turbo One & Turbosmart.

Krome Coating

Ceramic coatings increase part longevity and is recommend for use on parts that are exposed to extremely high temperatures such as headers or exhaust pipes, often referred to as exhaust coating, header coating or...