Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="nan83" data-source="post: 1063393379" data-attributes="member: 6718">viton... so far so good.... still not give any prob yet.. but my engine still run low boost.. maybe next 3 week i will dyno it...baro sensor = detect absolute pressure (ambient press).. sea level = 1bar , genting maybe 0.85bar.. this will link to fuel baro correction map.. normally we lock it at 1baro2 control valve?? you mean o2 close loop system ?? o2 sensor detect afr... ecu set the target.. so the ecu will try to adjust AFR to the the target we set by altering the injection mS ....idle control = the idle stepper motor will control by ecu base on set point we set... exp. 1000rpm .. ecu will try to maintain that rpm by open or close the stepper motor... the o2 control & idle control also have other control parameter to set.... how sensitive it will respond to disturbance.... we not set it correctly.... the output will go more crazy... so it not as simple as we think... hehehe... we want good afr with close loop.... end of result it will give more fuel consumption if we not set it correctly.... first we need to have very good base map, the last is we set the close loop system... so base map give stable afr reading, than the close loop system will take less job to correct the parameter... if base map not stable.. afr 13... than shoot to 14.. than shoot to 12.. the close loop system oso can gila.... huhuhu.. it take time to do correction, it no so fast algorithm & calculation...</blockquote>

Verification

The Marketplace Latest

original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Im interested to buy a rx8(m)

I heard them said rx8 gots lot of problem and maintainence will cost alot..may i get some advise from rotary sifu's??thanks alot.. :driver:

Project Z Week 15 : Still being stripped out

https://www.zerotohundred.com/wp-content/uploads/2011/08/262592_10150749392785352_902185351_20291553_1937156_n.jpg

Things were a bit slow with the Z project as our project partner, has been moving his old...

tdo5 water pipe bolts???

anyone knows where to get that part for that turbine???
pls help me...