Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ManR34" data-source="post: 1137780" data-attributes="member: 15490">i got my fitted at my mate's workshop in Banting. very easy..and ofcos u should get an airpod fitted...much better then leave it stock dude....its very cheap compared to other mods...better air flows for ur car mah...the noise and such are just the part of the grunt that turbo cars need :)kg/m2 is equivilant to bar readings...therefore if ur see needle its half way of 1...it means its 0.5bar...its as simple as that :Dif u want accurate bar readings like 0.6 or 0.7 or 0.8, like when u wanna boost it up...u must get urself a new gauge...and those electronic boost controllers got readings too....u can get gauges in PSI too....hahah then u have to learn that 1 bar=14.5 psiso therefore our stock cars only running at a mere 7.25 psi..which is fucking little actually....once u are able to boost ur car...thats where the real power increases gonna be felt. but to do that, need this and that....so its farken expensive...nevertheless we can safely boost to 0.7 bar....which is about 10psi...from 7 to 10psi is a big difference.....u will surely feel it! and thats with stock turbo and IC and i think safely to say stock ecu aswell.....altho better get a FPR....incase shortage of fuel due to higher boost settings....ofcos its better be safe and get ecu/bigger ic, fpr, fuel pump maybe, then u can play with ur boost settings even higher esp after fitted with a better/bigger turbo...maybe gun it to 1.2 bar...i am not sure but u get my drift :)</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

BMW introduces two new editions of the 320i

https://www.zerotohundred.com/wp-content/uploads/2011/03/bmw12-600x450.jpg

The BMW 320i will now be available in two new variants that were recently introduced by BMW Group Malaysia, the 320i Executive Edition and...

24 Hours of Nurburgring in 19500 frames

https://www.zerotohundred.com/wp-content/uploads/2010/05/24-hours-of-the-ring.jpg

A great video of the 24hour of Nurburgring created by Tim and Nick Hahne of a German production house called stereoscreen.de. It...

Pic : GTT to Full GTR Bolt-On 13 pcs Bodykits (FRP)

ER34 GTT convert to Full GTR kit. Total in 13 items which including of:-

1. GTR Bonnet,
2. LH Front fender,
3. RH Front fender,
4. Nismo Front bumper and Lip,
5. LH Side...