hi,
my evo3 engine has just been rebuild with engine rebore to bigger pistons.i start the engine,the rpm stays o.k but everytime i floor the clutch and take it for a ride,the rpm started to get higher & higher until reached 2500 when in idle.my foreman said there were leaks in the i/c piping & leaks in i/c hoses.i repaired and replaced them but the high idle was still there.i also just cleaned the t/b and ruled out the t/b problem possibility.i also have tried adjusting the idle at the (skru adjus idle la..)
i only set the f/p/regulator to 4.can someone please help to fix this??
for your info;
i'm using ogura clutch (klac loceng) it seems that everytime flooring this clutch and changing gears during ride,the high rpm happened,
safc (but not fully tuned),
a/campulley (not tuned also),
stock injectors,
stock fuel pump,
264 cam only the for the intake,
please help!!!
my evo3 engine has just been rebuild with engine rebore to bigger pistons.i start the engine,the rpm stays o.k but everytime i floor the clutch and take it for a ride,the rpm started to get higher & higher until reached 2500 when in idle.my foreman said there were leaks in the i/c piping & leaks in i/c hoses.i repaired and replaced them but the high idle was still there.i also just cleaned the t/b and ruled out the t/b problem possibility.i also have tried adjusting the idle at the (skru adjus idle la..)
i only set the f/p/regulator to 4.can someone please help to fix this??
for your info;
i'm using ogura clutch (klac loceng) it seems that everytime flooring this clutch and changing gears during ride,the high rpm happened,
safc (but not fully tuned),
a/campulley (not tuned also),
stock injectors,
stock fuel pump,
264 cam only the for the intake,
please help!!!