Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="H22-C" data-source="post: 2745213" data-attributes="member: 54493"><p>hi all, any one have experience using HKS 272 cam with original ECU?</p><p></p><p>1) how is the power band if install HKS 272 cam and using the original ECU?</p><p>will the low end got even less power? at RPM 2k ~ 4k.</p><p></p><p>2) using the original ECU with HKS 272 cam, is the increase in power significantly noticed ? at RPM 5k ~ 6K.</p><p></p><p>3) using the original ECU with HKS 272 cam, in terms of drivability, is it hard to drive ? due to low RPM no power, engine unstable during idle, or whatever...</p><p></p><p>4) heard that engine will be shaking during idle, un-stability during idle, how severe is it ? will the engine stall some time ?</p><p></p><p>5) i search through the internet, HKS 272 recommend to change valve spring, but it is not a necessary, ori valve spring also can use. any comment ?</p><p></p><p>6) just to confirm again, retainer kit no need to change ?</p><p></p><p>7) any other parts need to be mod ? fuel pump, exhaust, air-filter, etc ... ( i prefer to use ori ecu la, no budget liao)...</p><p></p><p>thanks all.</p></blockquote><p></p>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

low compression piston

is there any low compression piston that can fit into myvi engine?
yrv piston can fit?
need to bore the block?

looking for a GTR34

i would like to purchase a r34 gtr with original condition. maybe minor modification also can. pls pm me if any

Mivec Turbo

A successful development of 1.6 Mivec Tubo with the following dyno chart

http://www.dragerracing.com/dynochart/firststage_mivecturbo.jpg

Recent Posts

Darker Design : Mercedes-Benz Launches GLA Nightfall Edition in Malaysia
- Started by The_Mechanic
- News and Features
Honda Malaysia Doubles Down on Hybrids: New CR-V Launches with Dual e:HEV...
- Started by The_Mechanic
- News and Features
BateriHub Reaches 200-Store Milestone, Becomes Malaysia’s Largest...
- Started by The_Mechanic
- News and Features
Been stalking for 3 years edy
- Started by dheepadarshan95
- Introduction and Newbies
Recommendation: Turbocharger for 4B11 N.A engine
- Started by Mitevo7
- Car Modification

Search

Online now

Total: 5,503 (members: 0, guests: 5,503)

Enjoying Zerotohundred?

Log-in for an ad-less experience