Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="NukeeZoid" data-source="post: 4329482" data-attributes="member: 8937">hey guys. just wanted to share the hondata airbox mod i did over the weekend.i dont have a dremmel, so i had to make do with a handsaw and some pliers. the airbox was a bitch to cut because the plastic got REALLY thick towards the bottom of the airbox. top parts were easy, but midway it started to get thick....and a hand saw really doesnt do it...(explains the bad cutting)anyways...the concept is the same and i removed the snorkel to allow for more airflow because the stock snorkel actually leads towards the battery...which i think is idiotic design on honda's part, could've routed it facing forward.heres some pictures. i noticed a difference in the mid to high end...but theres a slight throttle lag at low rpms...much like what you experience from an open pod filter. i encourage anyone with a stock airbox to get this mod done. DEFINITELY worth it. i'm gonna get a K&N filter...and im sure the performance will be TONS better than the stock paper filter.best of both worlds....sleeper/stock looks....but with a higher flowing airbox + open pod like induction. Only dyno will prove results....but i could definitely feel an improvement!</blockquote>

Verification

The Marketplace Latest

TOYOTA VELLFIRE Z PREMIER 2025
- Started by ae92joon
- Cars for sale
Toyota harrier 2022 G
- Started by ae92joon
- Cars for sale
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Honda Civic FC Varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
BMW E60 M5 front kidney grille
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front bumper skirt
- Started by jeff6126
- Exterior and Body
Honda city rear skirt repair
- Started by jeff6126
- Exterior and Body
Honda Civic fc TypeR front bumper set
- Started by jeff6126
- Exterior and Body
Proton Persona ~accident repair ~spray painting...
- Started by jeff6126
- Exterior and Body
rim spray (glossy black)
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

GT-R Invasion @ Tokyo Auto Salon Singapore 2013!

https://www.zerotohundred.com/wp-content/uploads/2013/04/gtr-sg-11.jpghttps://www.zerotohundred.com/wp-content/uploads/2013/04/gtr-sg-13.jpg

The recent Tokyo Auto Salon did host a huge number of JDMs, but it seems...

choosing wheel hub PCD conversion

ok...the story was...

i'm planning to use 15inch spotrims with PCD114 on my PCD100 car(satria 1.6)....

and i'm aware that common thing ppl do to fit the rim was by doing PCD conversion by:

1)re-drilling stud...

About maintaining a RX8...

does it hard to maintain one?how much does it cost per year to maintain?sry,i don know much,tats why open this thread to get more information.Might be getting one ...