Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="zan" data-source="post: 1893762" data-attributes="member: 9632">the part is called quarter panel.and as the dent is minor, it is advisable to knock back instead of replacing the entire panel.fyi, changing the quarter panel will require JPJ/Puspakom inspection and approval and may affect future resale value of your car because they will stamp it in the registration card.further more, the weld used by those workshops wont be similar to the spot welding done at factory and may reduce body structure strengh. which explains why puspakom inspection is required.better to knock it back, and the price quoted is fairly reasonable. accidents happened no matter how careful we are on the road. so take extra care when driving - good luck!</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Airtrek Headlights

Hi guys, I am looking for Airtrek replacement headlamp units. The ones on the car have tiny cracks and am looking to get a replacement pair.

Any advice?

Thank you

how to install Blitz Dual SBC solenoid??

ok guys...i got problem dunno which one correct.. when we install this blitz solenoid what happen to stock solenoid?? just cut off the hose from stock solenoid and lock with screw or connect the hose from stock...

[DIY] Cleaning your throttle body

First, identify where your throttle body (TB) is. Since my Myvi is still using cable (and not electronic) I just locate where the cable is and voila, there's my TB...