Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Izso" data-source="post: 1063834464" data-attributes="member: 2429">6UE5t - Wah.. you said you're a noobie with all that? <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /> You sound like you know your beans man! So are you one with a anaconda poisoner setup in your car? AD_EG : I think there's some confusion here. I'm not a Kenwood person so I won't assume I know how it works but from my understanding of ICE this is what I think : HPF = high pass filter. Meaning whatever frequency you set and above will be sent to the speakers. Meaning if you set HPF at 40hz, everything above 40hz will be sent to the speakers. LPF = low pass filter. Meaning whatever frequency you set and below will be played on the speakers. BPF = Bandpass filter. This will specify the range between high and low to play. Meaning if you set bandpass at 80 to 4000hz, then it'll only play between that range.So if it's bass you're after, you should be setting LPF to the rear at around 100hz or 80hz assuming your speakers can handle it. Here's my advice, I assume your front components are using a passive crossover? If yes then for the front play full range (no filtering) since the passive is already doing the filtering. For the rear set the LPF to 100hz. Then set the fader to +2 front (or more).Check that you have everything in-phase, meaning positive speaker output to positive connector at the speaker. Negative to negative. Some say reversed might sound good but to me it never has so I usually insist on in-phase setup. Lastly, install that free amp and sub la. <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /></blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

Official Gran Turismo 5 release date set for 24 November

https://www.zerotohundred.com/wp-content/uploads/2010/11/gt51-600x690.jpg

Fingers crossed, prayers said and all deeds with the devil signed, let’s hope this time around it isn’t pushed back yet again as a post on...

balancer shaft removal

anyone mind to share on pros and cons on removing 4g63 balancer shaft?
those experienced may elaborate more. thx

r33 ori absorber can fit r32 hcr??? where to find gud price adjustable r32???

does it fit? on my r32 hcr? i mean r33 original absorbers, as i c all 4 absorbers uses all bushes fittin on da bottom rack.

can someone advice or has previous experience?

also do u noe where can source r32...