Good evening,
this golf i coated a month ago, and finally have the time to blog. previously this car owned by a lady owner who use to pick up her child from school, mileage only runs about 26k in 3 years. basically this car can say is still new but still i found alot of defects on it. the interior, dashboard and leather seats also found very oily meanwhile the exterior full of swirls and water spots. whole process will took me quite some time to get it done, let the pictures do the talking.
upon arrival
interior
stain
dust found
dirt and oil on leather
hidden treasure
cleaning process start with the carpet first
remember! dont fight against the lining
OPC diluted 1:1 to brush
rinse off immediately
after
stain?
the only cleaner you need in maintaining your daily drive. OPC brushing
after
doorstep before
after
before
during process
after
moving to vacuum process
good to use for hard reach area
after
before
after
moving to dashboard and door panel cleaning
this bucket of water is for rinsing purpose for the interior
leather seat cleaning. tape it and lets see what we can find
opc diluted 1:4
bucket of water for rinsing the leather seats. can you imagine?
moving to engine
close up
dont just keep looking the pictures, lets start cleaning the engine. OPC carry out again 1:3
before
after
before
after
before cleaning
after cleaning without protectant
2nd day, ONR to wash and inspect defects..
found plenty of wax residue
after
door side
rear light side gap
door handle
tight area was clean with a toothpick
all these resides mostly done by roadside waxing or used car dealer prior sending to the owner.
how it happens?
1. fast job
2. wax diluted with water
3. towel full of wax
4. drive thru (if you know what i mean)
5. didnt inspect after wax
moving to surface preparation..
clay
paint correction begin, tape all the necessary area to avoid compound dust/splatter (save your time for the compound job)
hood found swirls aka spider web
50/50
after
roof RIDS before
after
after
door after
A pillar before
now
before
after
rear light before
now
as usual i will dilute 15% of IPA (Isopropyl Alcohol) to remove any existing polish oil, silicone etc prior coating. some of the pictures after spending 3hours to coat it.
interior
thanks for viewing.
this golf i coated a month ago, and finally have the time to blog. previously this car owned by a lady owner who use to pick up her child from school, mileage only runs about 26k in 3 years. basically this car can say is still new but still i found alot of defects on it. the interior, dashboard and leather seats also found very oily meanwhile the exterior full of swirls and water spots. whole process will took me quite some time to get it done, let the pictures do the talking.
upon arrival
interior
stain
dust found
dirt and oil on leather
hidden treasure
cleaning process start with the carpet first
remember! dont fight against the lining
OPC diluted 1:1 to brush
rinse off immediately
after
stain?
the only cleaner you need in maintaining your daily drive. OPC brushing
after
doorstep before
after
before
during process
after
moving to vacuum process
good to use for hard reach area
after
before
after
moving to dashboard and door panel cleaning
this bucket of water is for rinsing purpose for the interior
leather seat cleaning. tape it and lets see what we can find
opc diluted 1:4
bucket of water for rinsing the leather seats. can you imagine?
moving to engine
close up
dont just keep looking the pictures, lets start cleaning the engine. OPC carry out again 1:3
before
after
before
after
before cleaning
after cleaning without protectant
2nd day, ONR to wash and inspect defects..
found plenty of wax residue
after
door side
rear light side gap
door handle
tight area was clean with a toothpick
all these resides mostly done by roadside waxing or used car dealer prior sending to the owner.
how it happens?
1. fast job
2. wax diluted with water
3. towel full of wax
4. drive thru (if you know what i mean)
5. didnt inspect after wax
moving to surface preparation..
clay
paint correction begin, tape all the necessary area to avoid compound dust/splatter (save your time for the compound job)
hood found swirls aka spider web
50/50
after
roof RIDS before
after
after
door after
A pillar before
now
before
after
rear light before
now
as usual i will dilute 15% of IPA (Isopropyl Alcohol) to remove any existing polish oil, silicone etc prior coating. some of the pictures after spending 3hours to coat it.
interior
thanks for viewing.
