Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="[PIMPIN]" data-source="post: 4495432" data-attributes="member: 2994">Bro, I'm not a mechanic nor am I an engineer so I'm going to explain to you in layman terms the differences between MAP and MAF. Both do they same thing which is basically to let the ECU know how much airflow there is. Too much fuel, runs rich. But how they go about it is different. If you look at the stock setup, you notice that there are two plugs immediately after the air filters. Those are the air flow meters and its from there that the ECU knows how much air flow to expect. But when you change gears and the blow off valve vents, then you end up with a bit too much fuel; in short it'll run rich sometimes causing it to stall.The MAP sensor reads the air pressure in the manifold and generally people tap into a vacuum hose to get the pressure reading. This info is relayed to ECU; x amount of fuel for x amount of airflow (calculated based on the pressure/boost). That's about as basic as I can explain it; of course its not detailed and there is a lot more to it and there are pros and cons for each of them which we will save for your next thread.So going back to the question of the blow-off valve being tight. When you say tight, there are two ways of looking at it. Some blow-off valves you can adjust the 'tightness' meaning how easily the valve opens. Too tight with stock boost might not be enough to open the valve all the way, and the air must end up somewhere. Lose generally means it'll open easier under pressure which of course equals a louder blow off valve sound.Another way of describing it as being lose is when the blow off valve won't hold the boost anymore. This basically means that the moment you come on boost the valve tends to leak; allowing the air to escape. This you will definitely notice because you will struggle to build up boost. This will affect the MAP reading. But usually if there is any form of leak then you would notice it when you drive. Does the car come on boost like normal? Anyways, if you suspect that your car is stalling because its running rich a free and easy way is to check your sparkplugs. See if they are fouled.---------- Post added at 11:07 PM ---------- 6 hour anti-bump limit - Previous post was at 10:56 PM ----------<img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/banghead.gif"  class="smilie" loading="lazy" alt=":banghead:" title="Banghead    :banghead:" data-shortname=":banghead:" /></blockquote>

Verification

The Marketplace Latest

original WedsSport SA70 18x9jj offset +32 5H pcd...
- Started by david tao
- Chassis and Wheels
Hi, I am Chong, From Malaysia i want to...
- Started by irfanirfan
- ICE -In Car Entertainment
BRAND NEW original rare Yokohama ADVAN Racing RG4...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ2 RZii...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG 16x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL 18x9jj offset...
- Started by david tao
- Chassis and Wheels
Spoon Sw388 18x10J+40 5H120 Rim Rims Civic FL5 Type R
- Started by aycy
- Chassis and Wheels
Spoon Crane Neck Wing Carbon Spoiler GT Wing Honda...
- Started by aycy
- Exterior and Body
Honda Jazz/Fit GK Mugen body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

WTB-Altezza Engine Cylinder Head(Manual 6 speed Version)

Hi bros, I'm looking for the Altezza Engine Cylinder Head(Manual 6 speed Version), anyone let go pls kindly SMS me at 0126068802, thanks.

Best Regards,
Edison

For sale : RB26 engine

sold ........

Zero To 200mph and Back