Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="s13-gts" data-source="post: 1817197" data-attributes="member: 38645">Dr D. Thanks for your reply. I was looking through a similar thread within this forum, there's a guy running on the RX7 injectors and it is running too rich even after the SAFC was installed. He mentioned that his mechanic, confirmed to him that the GSR can be used for an upgrade but I am not so sure about how it goes.I too have thought about it. But i havent seen a set of GSR injectors before, is it the same length as the RB20DET... if it's of high impedance and the measurement is the same, then it'll be great.Running out of steam? It shouldn't run out of steam when u runing 0.7 Bar. My car's stock boost is 0.8, with the stock turbos and its running fine - never failed on me.I am upgrading due to a new turbo. If i don't get an injector upgrade, then it's meaningless if i don't fully utilize the turbine :PKeep me posted on the results ok? When are you installing it?</blockquote>

Verification

The Marketplace Latest

Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body
BMW f30 mad style front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Fuel Injector Pressure Testing/Cleaning

Is there anywhere to do injector flow testing in jb?

TD04HL Boost up slow/lag wit 4G61t engine

im experienced a lag or boost up slow with td04hl rvr turbo after installed it today...like using td05h 16g...nearly 5000rpm full boost...b4 that im using td04l and have good response wit it....the td04hl looked good...

about turbo

guys...
wat is the difference between psi and bar?
wat does the bar means?
is there anyway to convert psi to bar?
thanx

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

Honda city JSracing gtwing spoiler

Honda civic fd ~car spray(Ferrari red)

Honda jazz fit gk flrs body kit

BMW F10 ~M5 front skirt lip with glossy black

Kia Forte gtwing spoiler

BMW F30 M3 front skirt lip

Proton Saga VVT Evo Front Bonnet Hood

Perodua bezza gear up body kit/spoiler

BMW F10 ~M5 front bumper set ~M5 kidney grille...

BMW f30 mad style front skirt lip

Posts refresh every 5 minutes

Recent Posts

Darker Design : Mercedes-Benz Launches GLA Nightfall Edition in Malaysia

Honda Malaysia Doubles Down on Hybrids: New CR-V Launches with Dual e:HEV...

BateriHub Reaches 200-Store Milestone, Becomes Malaysia’s Largest...

Been stalking for 3 years edy

Recommendation: Turbocharger for 4B11 N.A engine

Search

Online now

Enjoying Zerotohundred?