Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="camshaft" data-source="post: 4011801" data-attributes="member: 41701"><p>a friend of mine used a gsr intake manifold before change it to b16a+gsr on his 4g93 NA...the performance is mostly gain in higher rpm due to the short design of b16a intake....it allows air to enter faster into the combustion chamber....i tot that was the only time i see someone put a honda+mitsu intake 2gether...not until i saw another one at a workshop...this one has a skunk2+gsr on his satria drag car...so expect most improvement is around higher rpm...</p></blockquote><p></p>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Evo 1 to 10 Turbo Specs

Evo Stock Turbo Specs

Evolution 1
p/n = 49168-01450
Turbo = TDO5H-16G-7
Nozzle Area (cm2) = 7
TD05H turbine = Inconel (steel alloy)
Compressor = Aluminium
Inducer...

F-Type Coupe rendered

Yes, the F-type is back. Now...

Best Exhaust Manifold Design for Evo 4-9?

1. Symmetric V-Shaped to Turbine & External Wastegate
Internal wastegate/actuator will release air at a maximum of how much boost pressure? 0.8, 1.2 bar? An option to increase boost levels is to use external...