jerk when pedal to the metal

mnfazyze

Junior Member
Joined
Jul 30, 2012
Messages
19
Points
503
Location
johor bahru
My wira converted to 4g93 with 4g94 crankshaft.open mod.
The engine still berpantang.usually drove under 3.5k rpm.when i try pedal to the metal (under 4k rpm) it will jerk.when i drove it normal till 4k rpm, no jerk.
I still havent install management yet.wait till habis pantang.
Anyone can explain to me.is it coz of needed management or sumtin else?
Thanks guys
 
My wira converted to 4g93 with 4g94 crankshaft.open mod.
The engine still berpantang.usually drove under 3.5k rpm.when i try pedal to the metal (under 4k rpm) it will jerk.when i drove it normal till 4k rpm, no jerk.
I still havent install management yet.wait till habis pantang.
Anyone can explain to me.is it coz of needed management or sumtin else?
Thanks guys

get management+ do tuning then only can comfirm whats the problem

---------- Post added at 02:35 PM ---------- 6 hour anti-bump limit - Previous post was at 02:28 PM ----------

My wira converted to 4g93 with 4g94 crankshaft.open mod.
The engine still berpantang.usually drove under 3.5k rpm.when i try pedal to the metal (under 4k rpm) it will jerk.when i drove it normal till 4k rpm, no jerk.
I still havent install management yet.wait till habis pantang.
Anyone can explain to me.is it coz of needed management or sumtin else?
Thanks guys

get management+ do tuning then only can comfirm whats the problem
 
fuel starvation symptom
sabooo

---------- Post added at 11:21 PM ---------- 6 hour anti-bump limit - Previous post was at 11:21 PM ----------

fuel starvation symptom
sabooo
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience