Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="TRD.AE92" data-source="post: 3660478" data-attributes="member: 74569">Hello everyone. The owner of project is name Brandon and I have a 1994 Corolla with a 4agze swap that we are rebuilding and twincharging. E58 manual transmission w/ LSDae92 4agze bottom endHKS head gasket4age "blue top" bigport head and intakeSC12 modified to fitTOGA HV oil pumpRX7 550cc injectorsGarrett T3/T4 50 trim turboGarrett fmicHKS SSQVTial 38mm wastegateTubular manifoldTechno Toy Tuning adjustable cam gearsWRX spark plugsGreddy profec EBCAEM fuel and ignition controllerThis is his Old twincharge setup and pics:[ATTACH=full]670708[/ATTACH][ATTACH=full]670709[/ATTACH]Rebuilt progress:[ATTACH=full]670710[/ATTACH]engine pulled:[ATTACH=full]670711[/ATTACH]assembled and ready to go back in[ATTACH=full]670712[/ATTACH]putting it back in[ATTACH=full]670713[/ATTACH]new motor in[ATTACH=full]670714[/ATTACH]Problem faced:[ATTACH=full]670715[/ATTACH][ATTACH=full]670716[/ATTACH][ATTACH=full]670717[/ATTACH][ATTACH=full]670718[/ATTACH]here are some pics of the goodies that are going into the car/motorGreddy Profec Type S Electronic Boost Controllerhttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/007-2.jpgAEM Fuel and Ignition Controllerhttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/005-2.jpgAEM UEGOhttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/002-7.jpgARP Head boltshttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/009-4.jpgHKS head gaskethttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/003-5.jpgTOGA High Volume Oil Pumphttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/003-6.jpgAeromotive fuel pressure regulator kithttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/001-10.jpgTechno Toy Tuning adjustable cam gearshttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/002-5.jpgTubular Manifoldhttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/0c06_1.jpgOil Cooler/filter relocation kithttp://i691.photobucket.com/albums/vv280/Graphiterolla/corolla/parts/009-3.jpgBump: Got the FPR and all the fuel lines done. Put in the one way valve (which you can't see cause we are tight like that), T-pipe, and filter. Got some more wiring done. Hoping to post up some pics with all the intercooler piping done later.[ATTACH=full]670719[/ATTACH][ATTACH=full]670720[/ATTACH][ATTACH=full]670721[/ATTACH][ATTACH=full]670722[/ATTACH][ATTACH=full]670723[/ATTACH][/IMG]all the intercooler piping is mocked up and clamped in.[ATTACH=full]670724[/ATTACH][ATTACH=full]670725[/ATTACH][ATTACH=full]670726[/ATTACH][ATTACH=full]670727[/ATTACH][ATTACH=full]670728[/ATTACH][ATTACH=full]670729[/ATTACH][ATTACH=full]670730[/ATTACH][ATTACH=full]670731[/ATTACH][ATTACH=full]670732[/ATTACH]</blockquote>

Verification

The Marketplace Latest

MITSUBISHI / FE658 (RB/BK S2S)
- Started by PIstonHeads
- Chassis and Wheels
Perodua Alza gear up body kit
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
Honda city Mugen gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda Civic FD JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic FC varis GTwing spoiler
- Started by jeff6126
- Exterior and Body
JSracing GTwing spoiler
- Started by jeff6126
- Exterior and Body
Proton saga drive68 bodykit
- Started by jeff6126
- Exterior and Body
Perodua Bezza projectR body kit
- Started by jeff6126
- Exterior and Body
Honda city gm6 drive68 body kit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Sesto Elemento Enters Production, Limited at Only 20 Units!

https://www.zerotohundred.com/wp-content/uploads/2012/07/sesto_1-600x365.jpg

Remember the Lamborghini Sesto Elemento? While the Reventon and the Aventador looks more like an F-22 Raptor on the roads, this one has...

fuel vpower

guy..just wanna to know that the feul..vpower can boost to the max power..2bar ..? or maybe more..? with the fully buid engine..piston rod n everthing ...! any idea...?

how to installing boost meter?

good day bro's

i wanna ask how to installing a boost meter?

can anybody show me how or give a link ...

hope can d.i.y it.

thanks

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

MITSUBISHI / FE658 (RB/BK S2S)

Perodua Alza gear up body kit

brake caliper spray

Honda city Mugen gtwing spoiler

Honda Civic FD JSracing GTwing spoiler

Honda civic FC varis GTwing spoiler

JSracing GTwing spoiler

Proton saga drive68 bodykit

Perodua Bezza projectR body kit

Honda city gm6 drive68 body kit

Posts refresh every 5 minutes

Recent Posts

Recommendation: Turbocharger for 4B11 N.A engine

2026 Vios HEV launched with Local Battery Assembly - UMW Toyota Motor

SPPF: The Future of Automotive Surface Protection - A Technical Overview

Upping Wira 1.5 MMC performance

Volvo Malaysia Launches Locally Assembled ES90 Electric Sedan

Search

Online now

Enjoying Zerotohundred?