Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="chriszzz1225" data-source="post: 1064520100" data-attributes="member: 139850">Hi all, I am starting this thread to get some insights/advices/solutions on what could have caused my Kelisa's increasing problematic ride and handling:About a week ago my car skidded and hit a road divider. It was raining and I was driving across a hill road in Penang (Relau hill to be exact if anyone of you is from Penang). While negotiating a rather tight corner (I was driving quite slow, around 30 to 40kmh as I know the road is wet), my car lost traction and started steering to the oncoming traffic. I had to hit the brakes cos the corner was leading to a downhill path and god knows what will happen if I don't brake. The crash broke my car's left lower arm (screwed my left fender as well), so I got it replaced. My mech said that my car could have faced hydroplaning due to water or grease on the road, but as the one experiencing the crash I know that it is not merely these factors that caused the skidding. <img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/confused.gif"  class="smilie" loading="lazy" alt=":confused:" title="Confused    :confused:" data-shortname=":confused:" />I have actually got both of my car's front lower arms, front arm bushings and front stabilizer bushings replaced 2 weeks ago. Alignment was done too. So supposedly the car should had handled better than before as these components were really worn off. In fact, during non-raining seasons, my car handles rather okay. My front shocks are standard Kayabas and 3 years old, and I'm running on 14 inch wheels. While turning there was no creaking sound so I think the problem shouldn't be a worn off driveshaft.Could it be some worn off camber bolts, or steering issues? Do lend some insights on my issue ya, thanks a bunch!</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Evo1 speedcut,max boost,plug question.

hello guys..

i`m using evo 1 engine on my wira, but everyting is still stock xcept BOV an air filter.my question is:

1. how to remove the speed cut on the evo1 engine. the simplest way is most preferable : ).some...

evo 8 for sale!!!!

hi there....plan to sell of my evo8..wif many goodies...year of made 2003,but i bought it new last year march..means,basically it's a new car,not recon..
please call me if u r intrested...at 012-6077811..thanks

here...

DIY Vacuum/Boost Gauge Installation

:)

I take no responsibility from failures.... :)

disconnect battery b4 doing wiring works... unless u are very sure of what u are doin.