Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sideksepakragabulat" data-source="post: 1064512693" data-attributes="member: 118177">sory for brought up dis old thread..i've used this td04-09 before but from different engine..from my digging up in the internet my previous td04-09 is from mitsubishi lancer 1.8 turbodiesel..difference from penagihdadih turbo was my turbine housing only 3cm2(based on code written on the turbo)..mine start spooling around 400rpm earlier than penagihdadih unit..from there i got this idea off running the biggest td04 i can get my hand on and i got my "new" td04hl-15G from volvo 850..still not the biggest td04 but for me that thing about twice bigger than my previous td04-09..for my 1st experiment i just port my old 3cm2 turbine housing to fit the new turbo and the result is spool time become much2 sooner..in fact almost 1000rpm earliear than before..with this setup i was able to spooling around 2200rpm and reach full boost around 5k rpm..but the output is a bit dissapointing becos with this setup ,my engine only produce 90hp instead off 104hp while i was using that td04-09..but my torque seeing a good 2kg increasement..from 11kg to a 13kg..this was achieve with the same boost level around 1.2-1.3 bar of boost..this setup seem the best setup for city driving but i sacrifice too much when driving on hiway..so for my next project i was thinking to upsize my turbine housing from 3cm2 to 5cm2 from mitsubishi 1.8 gsr..and all this question keep pop up in my mind...1. what rpm will my turbo start spooling?3k,3.5k or 4k rpm?i targetting to spool around above 3k but not as late as above 4k rpm..2. will my torque number increase or decrease with the same boost level before?honestly i scared with high number torque as i find out that higher torque do stress out my drivetrain(gearbox,driveshaft etc..)3. i planning to use tubular exhaust manifold(banana)..will this effect anything?spool time,output,flow?will this thing be affected?4. i also plan to run the highest boost as i can and from there set the optimum boost for my daily use..will my full boost rpm be affected as well?5. do i need an ic upgrade?now using that ugly jasma thin intercooler..do i need to change them and use bigger or thicker oem intercooler?hope someone can enlight me a little..tq</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

2016 Paris Auto Show – Here's our Top 10 Favourites!

The 2016 Paris Auto Show is still ongoing for trade and public, but media days ended nearly a week ago and all debuts have been made, with automakers showcasing their latest offerings as well as their vision of what...

IDEMITSU Racing Rotary Lubricants

Hi guys,

Just want know your thoughts and opinions of this engine oil on your RE's.

IDEMITSU Racing Rotary Lubricants 10W30. Apparently its available in Pit Stop, Sunway Pyramid.

Has anyone used it before? any...

Hyper Attack 2008 - By Auto Otaku

I'm crying :adore:

April 08, 2008

Coverage: Hyper Meeting 2008 (Now with Video!)

View attachment 640557

I have to apologize for the lack of updates recently, I have been quite busy the past few days...