Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="xtremeleo" data-source="post: 4399010" data-attributes="member: 18941">evolutionz, it supposed to but in time, the tolerence got bigger and the oil passage will sumhow get blocked up wit sludge and grime, so less oil pressure is able to be pumpep up there, more noise. ive been trying everything dat i can possibly do, including sum good ideas from frens here, and ive overcome my ticking problem, in a 4G91. adding shims to the oil pressure bypass valve solved my problem and the engine operated witout any noise, but it came back after sumtime. so, i tried to a 20w-50, but even dat doesnt solve the problem entirely since the noise come and go as it pleases. then, i tried another brand 15w-50, and now the noise disappears, and after 2 days of trial run, it hasnt return yet. it depended on oil quality much, these hydraulic lifters. get a good based oil, and u'll be set to go silentvrozario, mivec has screws to adjust the clearance, so its comparatively easier to reduce the lifter noise compared to hydraulic lifters. have u adjusted those?</blockquote>

Verification

The Marketplace Latest

Mitsubishi lancer Evo x front bumper
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
Proton S70 body kit
- Started by jeff6126
- Exterior and Body
Proton saga BLM body kit
- Started by jeff6126
- Exterior and Body
Perodua bezza ~accident repair
- Started by jeff6126
- Exterior and Body
Mercedes Benz W205 C-class GT grille
- Started by jeff6126
- Exterior and Body
BMW E90 ~brake caliper spray ~rim spray
- Started by jeff6126
- Exterior and Body
Honda city gm6 FL front bumper
- Started by jeff6126
- Exterior and Body
original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

aftermarket gauge bulb

im using some aftermarket gauge like omoni..i mean old school type..theres 2 type

the one that bulb outside using 2 pin..and one smaller one..where can i repair the smaller one since it already blow

SARD Meter with APexi Controller

Maybe this is a wrong thread, but i think this thread is the most suitable..

There are some person selling me Sard Exh Temp meter, but it comes with Apexi control unit. He had all the wire wired to the control unit...

spraying my bike

http://photos10.flickr.com/11737281_bc6a96289c_m.jpg
see that white cover. That is what I want to spray ( now so ugly because it start to crack) . The problem is that I always wax that area and the paint will sure...