Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="skyboy" data-source="post: 1063420378" data-attributes="member: 35244">Featureshow to setup this features for Evo 8 MRI want A to be 1 bar and B to 1.5barHow does the scramble thingy works.... sorry for basic question first time user hope u guys understand.. thanksTarget Boost* User inputs target boost level, and the EVC automatically adjusts pressure to reach desired level.Offset Function* If boost exceeds or does not achieve user’s target, boost pressure can be offset to reach desired level.Map Correction Mode* Boost pressure can be fine tuned for: Throttle Position, RPM, Vehicle Speed, Throttle Position + RPM, or Throttle Position + Vehicle Speed.Dual Boost Mode Settings* Separate A and B boost levels can be input independently from each other, and selected depending on driving conditions.Scramble Boost Function* When the scramble boost trigger is depressed a preset boost increase will occur for a predetermined time (0-60seconds).* External Scramble Boost Trigger compatible.Metric or SAE selectable monitoring* Users can choose during initial setup metric (kPa) or SAE (PSI) boost pressure measurement for monitoring.Warning Function with Boost Drop Feature* A user preset warning level can be set where visual and audible alerts occur if the warning level is reached. Boost pressure can be preset to drop to a user defined level if pressure reaches warning level.Analog and Digital Boost Monitoring* Boost pressure can be displayed in both an analog bar graph format and a digital numerical value.Additional Digital Monitoring* Along with Boost Pressure two additional vehicle vitals can be monitored: Throttle Position, Engine RPM or Vehicle Speed.Selectable Analog Monitoring* The digital bar graph can be set to monitor: Boost Pressure, Throttle Position, Engine RPM or Vehicle Speed.After Image Function* Users can set the EVC to display the highest boost pressure reached for 3-seconds after the throttle has been released.Data Lock* To prevent accidental data changes from occurring, the EVC can be locked with a user defined four digit code.</blockquote>

Verification

The Marketplace Latest

original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Need to reset ECU?

Hi guys, I have one question here.. Dunno where else to ask in zth forum. :hmmmm:

I drive a Civic EJ. My car ECU needs to be reset (disconnect battery) after a few months or else the engine will be a bit sluggish...

Ferrari 599 GTO the greatest ever made? Find out here

https://www.zerotohundred.com/wp-content/uploads/2010/06/599-GTO.jpg

The Ferrari 599 GTO marks the revival of the GTO brand first seen in the legendary 250 GTO of the early 60's and later in the 288 GTO of 1984...

Greddy Profec A and Rebic III

Any Sifus has or have experience in installing the Greddy Profec A and Rebic III???
Please call me at 016-3808883... Thank u!!!