Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sloth" data-source="post: 3472879" data-attributes="member: 50763">No sato-san, not the centre cover.. but the inside thingy - like the pix i posted, that inside centre thing (the centre is metal, and the surround is black plastic/rubber), there is a short rod in the middle where it is connected to the steering column later.I guess it's gonna be hard to find one, so the alternatively is to get a steering with burst or missing airbag.. tension.. tension..Bump: amd,no la.. i went to:-1) one shop near mun lee puchong (got his advert somewhere here in zth) for the front seats.. claimed to be under VDP (vendor development program) for fabric replacement under mun lee but the workmanship is so-so only.. plus not really customer friendly. the shop is also not that impressive.2) carbi deco near tesco puchong - went to rewrap my stoopid, incomplete steering and for fake CF of gear console. asked to rewrap my door panel but no CL1 fabric available. Shop seems ok, many high end cars - last visit saw maserati quattroporte..3) a shop in seri kembangan industrial park (also got advert in zth).. workmanship nice and he knows about CL1/CF4 (bought 1 complete set CF4 seats for his corolla SEG - dunno how he fit the rear seats tho. can ka?). price quite expensive but as i was desperado and tired looking for shops, i just did it (in fact the remaining CL1 fabric left in his shop is just nicely enuff for my door panels).badminton low risk injury ka? my wife torn her achilles tendon in december while playing badminton woo.. now while walking still tempang a bit. and if not mistaken some time ago, got one prominent politician diead while playing badminton..moral of the story:- sports are dangerous! be a professional couch potato like me then! heheheBump: after i bought the CL1 (CL1 ka? dunno laa.. bought from yewson) front and rear knuckles, the installation need:-1) d/shaft SV4 (M) ABS2) d/shaft SM4 (M) ABS3) d/shaft cover4) Ball joint5) Grease (??? - hahahha aku tak paham tulisan die dlm resit, tp dlm RM30) d/shaft5) nut d/shaft6) brake fluid7) labour costcost for barang2 = RM900, labour cost = RM300Bump: amd,ur car in this pix looked like previous gen Mazda6 ler.. hehehewhere's ur grandpire front lip? i got the rear one.. maybe we both can donate to wandy before he get the real McCoy..</blockquote>

Verification

The Marketplace Latest

Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

WTS: Evo's Parts

Few item to let go

1. HKS hypermax adjustable adsorber HI LO SOFT HARD for evo 4-6 SOLD

2: Evo 4 Full bodyparts. Include front bumper with foglight, front bonet and fender, side skirt, rear bumper, rear...

how to different lancer convert to e5,e6?

How to different it ? is there any website about this info ? lancer body fully convert to evo.. I got a friend looking at a original e5, but he scare is convert even in car registration is stated e5 chassis... Can it...

99' spec front lip?

Hi guys. . . .

Any knows where to get the front bumper lip? Is the 99' spec bumper lip similar with the older version bumper lip?