Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Enthusiast" data-source="post: 1788467" data-attributes="member: 18629">Ok guys been missing some time....anyways here are some updates on setup and the Dyno results that i promised......Changes on setup : b18c gsr block, b16a head, b16a IM, B16a TB bored to 66mm, mugen chip, Type-r 4-2-1, Racecraft cf filter, 2.5 inch jaafar custom piping, 5zigen fireball muffler, b20 injector, pr3 cam, p30 piston, engine n flywheel lightened, exedy semi race, p72 gearbox w lsd, safc2....running on 250 psi compression prolly due to the p30 pistons and head skimming and ligthening by previous owner....After some tuning on the afc2, manage to get 166 whp, 168nm torque.....I feel like there are much much more hp that can be squeezed out of the engine...Issues :1) The compression if converted i think will be approx 12.xx ratio.....is this ratio enough to maximise the power of jun/toda/crower cams? or shud i juz plonk in ctr cams?2) My a/f map leans out all of a sudden to ridiculous figures at around 2 - 3k rpm.....tuner suggested something is wrong with the mugen chip.......and tuner claim engine was still running abit lean due to safc2's limit of adding fuel at higher rpms....again due to the limitations of the original mugen mapping.....the afc can only add more fuel till a certain point before the signal overloads and check light comes on.......can chips be faulty having this kind of problems? any solutions/suggestions from sifus?btw i tuned it in GT auto.3) i aim to get 180 whp or above.....any suggestions? i feel like taking the head out....p/p head and Im......and plonk in aftermarket or ctr cams.......ths should yield same results as a b16b head + b16b IM imo......no point spending so much extra for the type-r items i guess......thats abt it......sorry for the long post.......but hope there'll be more of this kind of posts, like in jdmuniverse and honda-tech.com.........any other member willing to post up their specs and dyno results?Some pics of my ride...http://img528.imageshack.us/img528/1940/image707ye0.jpghttp://img528.imageshack.us/img528/3117/image709kq2.jpghttp://img528.imageshack.us/img528/9130/image710py8.jpghttp://img528.imageshack.us/img528/6395/image683cc3.jpg</blockquote>

Verification

The Marketplace Latest

2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment

Posts refresh every 5 minutes

Shell Eco-marathon Asia 2012 - Malaysians Students Do Us Proud!

SEM-Asia-2012-02-Team-Universiti-Kebangsaan-Malaysia-UKM-Solar-powered-Prototype-600x405.jpg

Malaysian students from five local universities did...

Aftercooler

i don't noe where to post this topic... so here it is.... my question is.... is that possible to install 'aftercooler' device in petrol engine type...? specifically in Mitsubushi engine...

Mazda 808, mk 5 13bT 4 sale

Mazda 808,
with road tax and passed JPJ inspection
engine inspection also done

13b Turbo from mk 5 standard
3 inch stainless steel system
LSD( not welded...its a proper LSD from SA22)
16 inch tyres, rear suspension...